Bids Are Invited For Acquisition Of Electrical And Electronic Materials (Led Drivers And Insulating Tape), Intended For The Repair Of Led Luminaires For Maintenance Of Public Lighting Under The Responsibility Of The Municipal Fund

Led Driver1. Technical Characteristics • Nominal Power: 100 W • Input Voltage (Vin): 100–277 V Ac • Frequency: 50/60 Hz • Output Voltage (Vout): 54–80 V Dc • Output Current: 1260 Ma (Approximate Variation From 1180 Ma To 1260 Ma ±5%) • Control Type: Constant Current • Efficiency Typical: 90% To 93% • Degree Of Protection: Ip65 • Integrated Protections: Ovp – Overvoltage Protection Scp – Short-Circuit Protection Otp – Overtemperature Protection Uvp – Input Undervoltage Protection • Regulatory Compliance: The Equipment Must Meet The Applicable Abnt Technical Standards And Have Inmetro Certification, When Required By Current Regulations., Tape Electrical Insulation Made From Flame-Retardant Pvc Film, With Pressure-Sensitive Rubber-Based Adhesive, Minimum Length Of 20 Meters, Approximate Width Of 19 Mm, Minimum Thickness Of 0.18 Mm, Black Color, Minimum Voltage Class Of 750 V, Minimum Thermal Resistance Of 105°C, With Good Conformability, High Resistance To Abrasion, Humidity, Weathering And Ultraviolet Rays, Suitable For Use In Low Voltage Electrical Installations.