Tenders Are Invited For Construction Of A Municipal Road In Wieluń

1) The Subject Of The Order Is The Construction Of Ul. Górska, Constituting The Municipal Road No. 207007G In The Town Of Wiele With Accompanying Infrastructure On A 534 M Long Section. Technical Parameters Of The Road: - Width Of The Asphalt Surface - 5.0 M, - Length Of The Asphalt Section - 534 M, Pavement Structure: On The Designed Section Of The Road, After Removing The Topsoil Layer (Humus Layer), The Following Structural Sections Were Used: - Construction Of A Technological Channel, - Layer Cement-Stabilized Aggregate With Rm 2.5 Mpa Thickness. 10 Cm, - Foundation, A Mixture Of Mechanically Stabilized Crushed Aggregate 0/31.5, 20 Cm Thick, - Binding Layer Of Ac 16 W, Thickness. 5Cm, - Wearing Layer Made Of Ac 11 S Thick. 4 Cm, Surface Closed With A Concrete Curb. 15X30cm On A Concrete Bench. C12/15, Cross-Section Of The Sidewalk Structure (Pedestrian Path): - Layer Of Cement-Stabilized Aggregate With Rm 1.5 Mpa Thickness. 15Cm, - C-P Ballast 1:4 Gr. 5 Cm, - Surface Made Of Vibro-Pressed Bevelless Concrete Cubes, Thickness. 8 Cm Gray/Graphite Color, Surface Closed With A Concrete Edge. Gr. 8 Cm On C-P 1:4 Ballast, Vertical And Horizontal Road Safety Signs, Pedestrian Crossings, Rainwater Drainage: Drainage System, Drainage And Water Drainage Devices In Accordance With The Design. Notes! Before Starting The Works, All Crushed Stone On The Road Should Be Removed Along The Entire Width Of The Road To The Sewage Treatment Plant In Cisewie. After Dismantling, Old Road Signs Should Also Be Transported To The Sewage Treatment Plant In Cisewiu. Painting Of Horizontal Lines Using The Thick-Layer Method.2) According To The Common Procurement Vocabulary (Cpv), The Subject Of The Order Covers The Scope Defined By The Codes: 45233120-6 Road Construction Works.3) The Contractor Is Obliged To Compare The Compliance Of The Submitted Studies And In The Event Of Any Discrepancies, He Is Obliged To Ask The Ordering Party In Writing For An Explanation As Soon As Possible. In The Event Of Differences In Technological Solutions (Including The Materials And Devices Used), The Solutions Presented In The Construction Design, Bills Of Quantities And Additional Descriptions Shall Apply First.4) To Perform The Order, The Contractors Are Obliged To Use New Materials And Devices, Grade I, Purchased From Reputable Manufacturers, Guaranteeing The Highest Quality, With Technical And Quality Parameters Not Worse Than Those Specified In The Bills Of Quantities. The Names, Types And Origins Of Products Appearing In The Studies Are Not Binding On The Contractors. 5) To Complete The Order, The Contractors Are Obliged To Use Equipment And Materials That Meet The Requirements Of The Polish Standard Transposing The European Standard Pn-En (Harmonized Standards) And Others Specified In The Technical Specification For The Execution And Acceptance Of Construction Works And Design Documentation. The Contractor Is Obliged To Have Documents For The Materials And Devices Used That Allow T