Tenders Are Invited For Delivery Of A Used Car Intended For Collecting Municipal Waste, With Rear Loading Of Waste On A Three-Axle Chassis, Financed In The Form Of Operational Leasing With A Purchase Option.

1) The Subject Of The Order Is The Supply Of A Used Car Manufactured In 2019-2020 Intended For Collecting Municipal Waste, With Rear Loading Of Waste On A Three-Axle Chassis (Produced In 2019-2020), Financed In The Form Of Operational Leasing With A Purchase Option. Chassis:1. Year Of Vehicle Production: 2019-20202. Maximum Vehicle Mileage: 140,000 Km 3. Axle Configuration 6X24. 3-Seater Cabin With Mechanical Suspension5. 3 Independent Seats In The Cabin With 3-Point Seat Belts6. White Cabin7. Front Suspension With A Technical Load Capacity Of At Least 8 T8. Rear Air Suspension With A Technical Load Capacity Of At Least 19 T9. Trailing Axle Electrohydraulically Steered10. Additional Rear/Trailing Axle Stabilizer11. Front Suspension – Parabolic Springs12. Wheelbase Min 4000 Mm13. Engine Displacement Min. 10,000 Cm314. Engine With Min. Power 240 Kw And Max. Torque Min. 1600 Nm15. Euro 6 Exhaust Emission Standard With Selective Catalytic Reduction System16. Automated Or Automatic Gearbox, Without Clutch Pedal17. Fuel Tank, Minimum 250 Liters, Aluminum18. Adblue Tank Min. 55 Liters19. R22.5 Steel Rims With Size 315/8020 Tires. Side Underrun Protection (Anti-Bicycle Protection) Approved Building: 1. Body With An Oval Cross-Section Without Ribs 2. Flat Walls Of The Body Made Of One Sheet Of Sheet Metal 3. Rounded Floor Of The Box With An Inspection Opening With The Possibility Of Draining Off Waste 4. Body Of A Single-Chamber Garbage Truck With Linear-Drawer Crushing 5. Guides Of The Pushing Wall Inside The Body - On The Sides 6. Possibility Of Controlling The Loading Mechanism In Automatic, Continuous And Manual Cycles7. Load Box Capacity: Min. 22 M3 8. Color Of The Body: White, Corresponding To The Color Of The Chassis Cabin. 9. Body Tray Made Of Hardox 450 Sheet (Or Equivalent) With A Minimum Thickness Of 10 Mm. 10. Sides Of The Tailgate Tank Made Of Hardox 450 Sheet Metal (Or Equivalent), Min. 6 Mm Thick. 11. Additional Covers On The Sides Of The Tailgate Tank, Min. 4 Mm Thick. Hardox 450 Sheet Metal (Or Equivalent) To Increase The Durability Of These Elements 12. Actuators For Opening The Trunk On The Roof Of The Body (No Contact With Waste When Emptying The Load Box) 13. Two Cylinders Each Of The Press And The Scraper Mechanism Mounted Inside The Trunk With Surface-Hardened Piston Rods 14. A Seal Between The Pushing Plate And The Side Walls Of The Box Along The Entire Length Of The Connection, Applied To The Entire Height In To Ensure Maximum Tightness When Collecting The So-Called Waste Wet Fractions 15. A Feeding Device For Containers With A Capacity Of 120 L To 1100 L In Accordance With The Mgb En/Pn 840 Standard -1,- 2,- 3 Or Equivalent 16. A Charging Device Made Of Steel Structure, Removable, Replaceable As A Whole (As A Complete Device) From The Rear Of The Load Box 17. Only A Manually Operated Loading Device In Accordance With The Standard Pn-En 1501-5:2021-08 Or Equivalent Adapted To Work With Containers Manufactured In Accordance With Th