Bids Are Invited For Acquisition Of School Furniture, Intended For Serving Students In The Municipal Education Network, To Comply With The Municipal Schools Strengthening Program, In Accordance With Exit Agreement No. 12611001884/2025/See

Youth Dining Room Set - Table With 12 Chairs - Table With A Single Seamless Top Measuring 2150Mm Long By 950Mm Wide, With A Thickness Of 8Mm And A Seamless Edge Measuring 50Mm Made Of Virgin Abs High-Impact Thermoplastic Resin, Free Of Mineral Fillers, Manufacturers Logo Injected On The Surface Of The Table Top. Top Fixed To The Structure Using Screws. Top To Floor Height Of 640Mm. Table Top Base Formed By Two Square Tubes Measuring 25X25mm Positioned Under The Top, Manufactured Using The Mechanical Forming Process By Folding, Covering The Entire Perimeter Of The Table, Resulting In Two Welding Points And A Horizontal Support Bar Made Of 25X25mm Tube, 4 Columns With 2“ Inch Tube For The Feet, With Resin Tips Injected Pp (Polypropylene) Plastic. The Entire Metal Structure Is Manufactured From Carbon Steel Tubes Treated By Sets Of Chemical Baths For The Protection And Longevity Of The Structure And Welded Using The Mig System. Vertical Extension And The Seat Is Approximately 400Mm Wide By 380Mm Deep, Both Components Mounted On A Carbon Steel Tubular Structure, Produced In 7/8” Type Tubes That Form The Seat, Back And Front Legs. Rear Feet In Tube With A Diameter Of 22.22Mm And Connection Bar In 7/8 Tube Connecting The Rear Feet. Seat Reinforcement In 5/8 Tube. All Metal Structure Electrostatically Painted In Gray Color. Pp (Polypropylene) Plastic Resin Tips. Chair With 380Mm Height From Seat To Floor., Childrens Dining Room Set - Table With 12 Chairs - Table With A Single Seamless Top Measuring 2150Mm In Length By 948Mm In Width, With A Thickness Of 8Mm And A Seamless Edge Measuring 50Mm, Made Of Virgin Abs High Impact Thermoplastic Resin, Free From Mineral Fillers. Manufacturers Logo Injected On The Surface Of The Top. Top Fixed To The Structure Using Screws. Top To Floor Height Of 590Mm. Table Top Base Formed By Two Square Tubes Measuring 25X25mm Positioned Under The Table Top, Covering The Entire Perimeter Of The Table And Resulting In Two Welding Points Joining The Ends And A Horizontal Support Bar Made From 25X25mm Tube, With Injected Pp (Polypropylene) Plastic Resin Tips. Chair - Stackable Model Chair With Seat And Back In Pp Plastic Resin (Polypropylene). The Backrest Is Approximately 340Mm Wide By 280Mm Vertically And The Seat Is Approximately 340Mm Wide By 340Mm Deep, With Backrest And Front Legs. Rear Feet In Single Tube With Diameter Of 22.22Mm And Connection Bar In 7/8 Tube Connecting The Rear Feet. Seat Reinforcement In 5/8 Tube. All Metal Structure Electrostatically Painted In Gray Color. Pp (Polypropylene) Plastic Resin Tips. Chair With 350Mm Height From Seat To Floor., 03/19/2026 - 14:00:23