Fixing Frame For Plate, Made From 1.1/4 With Sequential 10Mm Holes, In The Horizontal And Vertical Beams, With An Interval Of 300Mm Between The Holes, And Four Supports With 5/16 Frame. Warranty: Supplier Must Present Galvanization Certificate Of At Least 48 Months. If A Manufacturing Defect Or Oxidation Occurs, The Material Must Be Replaced Without Charge To The Municipality. - Meeting The Specifications Contained In Annex I And Ii Of The Tr, With Dimensions Of 1800 X 300Mm. With 10Mm Sequential Holes, Fixing Frame For Plate-Fixing Frame For Plate, With Four Clamps, Manufactured In 1.1/4 X 1/8 Angle. With Dimensions Of 2300 X 1000Mm. With 10Mm Sequential Holes, Both 200Mm From The Outer Edge Of The Frame. The Material Must Receive Galvanization Using A Hot Dip Process After All Manufacturing Steps, Ensuring The Uniformity Of The Galvanization. Supplier Must Present A Report From A Laboratory Accredited By Abipti. Meeting The Standards: Abnt Nbr 6323; Abnt Nbr 7397; Abnt Nbr 7398; Abnt Nbr 7399; Abnt Nbr 7400. If A Manufacturing Defect Or Oxidation Occurs, The Material Must Be Replaced Without Charge To The Municipality, Meeting The Specifications Contained In Annex I And Ii Of The Tr, With Dimensions Of 1800 X 800Mm. With 10Mm Sequential Holes, Material Must Be Replaced Without Charge To The Municipality. See Annex - In Compliance With The Specifications Contained In Annex I And Ii, Support For Installing A Sign Board. Support For Signage Plates, Made Of Steel Tube With A Diameter Of 2” Inches, 3Mm Thick And 2.00 Meters Long, Seamless - The Support Must Contain Two Holes Of 12Mm In Diameter On The Top For Fixing The Sign, With A Distance Of 50.5Cm Between Holes. The Distance Of The First Hole In Relation To The Top Of The Support Is 5Cm. At The Base, It Must Contain Two Welded Steel Fins For Better Fixation Of The Rod To The Ground. The Upper Part Of The Tube Must Have A Welded Cover To Prevent Water Infiltration. The Supplier Must Present A Laboratory Report. Accredited By Abipti. Complying With The Standards: Abnt Nbr 5580; Abnt Nbr 7397; Abnt Nbr 7398; Abnt Nbr 7400. If A Manufacturing Defect Or Oxidation Occurs, The Material Must Be Replaced Without Charge To The Municipality. In Annex I And Ii, 03/18/2026 - 07:52:53, 03/18/2026 - 07:52:56, 03/18/2026 - 07:52:58
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
