Bids Are Invited For Acquisition Of Permanent Equipment And Materials, From The Remaining Balance, Destined For The Luiza Pereira De Carvalho Municipal Hospital In The City Of Caetés/Pe.

Phototherapy Device (Jaundice/Neonatology) By Irradiation Of Lamps (Fluorescent Or Halogen Or By Led Source), Consisting Of A Rotating Reflector Unit And Mobile Base With Casters And Brake System. Led Lighting, Microprocessed Control Panel, Irradiance Adjustment, Heated Crib To Accommodate Newborns, Heated By A Radiant Heat System To Provide Thermal Comfort. Equipment With Radiant Heat Heating System Using A Heating Element Located In The Upper Part Of The Crib. Have Bilateral Swivel In The Horizontal Plane For Positioning The X-Ray Machine; Have A Tray To Accommodate The Radiographic Film. Newborn Bed Made Of Radiotransparent Plastic Material With Folding And/Or Removable Sides To Facilitate Access To The Patient, Manual Adjustments Of The Bed At Minimum Trendelenburg And Proclimb Inclines; Foam Mattress Of Appropriate Density For The Patients Bed In Non-Toxic Material, With Removable And Anti-Allergenic Covering In The Dimensions Of The Crib. Steel Structure Painted With Epoxy Paint Or Similar, Mobility Through Casters With Brakes And Bumper. Led Or Lcd Display For Indicating Temperature And Desired Power; Memory For Retaining Programmed Values. Microprocessor Control System, With Servo Operating Mode Controlled Through Sensor Connected To The Rn And Manually; Built-In Erase Clock; Intermittent Audiovisual Alarms For Viewing At Least: Power Lack; Heating Resistance Failure; Missing Sensor Or Sensor Dislodgement In Patient. At A Minimum, Equipment Must Be Included: Tray Under The Bed For Storing Miscellaneous Materials And Iv Pole. Electrical Power Supply To Be Defined By The Requesting Entity., Neonatal Transport Incubator Equipment Used To Provide Life Support, During The Transport Of Newborns In A Suitable Environment Of Humidity, Temperature And Oxygenation. Equipment Has A Dome Made Of Transparent Acrylic, With Double Walls On Its Entire Surface To Protect The Patient Against Heat Loss. Base In Plastic Material, With Carrying Handles And Two Supports For Medicinal Gas Cylinders. Front Access Door And Another Side Access Door, Both With Double Walls; Have Doors With Handle Sleeves And Autoclavable Gaskets In Non-Toxic Silicone; 1 Iris Type Door For Passing Pipes And Drains. Bumper That Protects The Entire Perimeter Of The Incubator. It Must Have A Removable Bed Made Of Anti-Allergenic Plastic Material With Dimensions That Allow Adequate Ergonomics For Seat Belts Made Of Soft And Resistant Material, Easy To Adjust. It Must Have A Removable, Waterproof Mattress Made Of Non-Toxic And Self-Extinguishing Material With Foam With Adequate Density, Seamless, Pressed And A Removable Cover. Oxygen Intake Without Gas Dumping Into The Atmosphere, Allowing High Efficiency, Economy And Protection, Attached To A Support With Adjustable Height, With Castors And Brakes. Humidification Through Foam Under The Bed. Auxiliary Lighting With Flexible Rod For Focus Adjustment. Must Have A Bacteriological Retention Filter. Control Panel Must Provide Thermal Monitoring Of The Patients Environment, Have Microprocessed Control Of The Air Temperature Of The Incubators Internal Environment And Control Of The Neonates Temperature Using A Skin Temperature Sensor. Must Have Audiovisual Alarms For Lack Of D