Rolled Steel St. 3Sp, Hot Rolled, Round Section, Diameter 20 Mm Gost 2590-2006, St Rk Tn 10060-2015, Welding Wire Sv08g2s D-4Mm Gost 2246-70 St Rk Iso 544-20012, Knitting Wire With A Diameter Of 1.2 Mm Additionally Annealed Standard Gost 3282-74, Hot Rolled Round Steel St40x D 30 (Mmt Pins) Gost 2590-2006 St Rk En 10060-2015, Hot-Rolled Round Steel St45 D 25 (For Scrap) Gost 2590-2006 St Rk En 10060-2015, Hot Rolled Sheet St3sp-5 Thickness 5.0 Mm Gost19903-2015/Iv-St3 Gost16523-97 St Rk En 10029-2012, Hot Rolled Round Steel St40x D 40 (For Blow Axles) Gost 2590-2006 St Rk En 10060-2015, Hot Rolled Sheet St3sp-5 Thickness 6.0 Mm Gost19903-2015/Iv-St3 Gost16523-97 St Rk En 10029-2012, Hot Rolled Sheet St3sp-5 Thickness 3.0 Mm Gost19903-2015/Iv-St3 Gost16523-97 St Rk En 10029-2012, Hot Rolled Round Steel St40x D 45 Gost 2590-2006 St Rk En 10060-2015, Hot Rolled Round Steel St45 D 60 (Shafts, Sledgehammers) Gost 2590-2006 St Rk En 10060-2015, Steel Channel No. 12. Height: 120 Mm, Shelf Width: 52 Mm, Wall Thickness: 4.8 Mm, Average Shelf Thickness: 7.8 Mm, Weight Of 1 Meter: 10.4 Kg, Section Area: 13.3 Cm². St Rk En 10279-2016, Rolled Steel St. 3Sp, Hot Rolled, Round Section, Diameter 8 Mm Gost 2590-2006, St Rk Tn 10060-2015, Steel Channel No. 16. Profile Height: 160 Mm. Shelf Width: 64 Mm. Wall Thickness: 5 Mm. Shelf Thickness: 8.4–8.5 Mm. Weight Of 1 Linear Meter: 14.2 Kg (Usually). Meters Per Ton: ~70.3–70.4 M. 8240-97 St Rk En 10279-2016
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
