Bids Are Invited For Price Registration For The Possible Acquisition Of A Set Of Posts, Led Luminaires And Electrical Materials To Meet The Demands Of The Municipal Administration Secretariat.

Ornamental Poles Type Led-Pj-Led01-A/B The Set Of Pole And Ornamental Led Luminaire Of At Least 90W And A Height Of 4.5 Meters Must Be Fixed By A Built-In Flange Using Anchor Bolts, Luminaire For Public Led Lighting - With A Minimum Power Of 70W And A Minimum Luminous Flux Of 9,100 Lumens As Per Declared In The Inmetro Certificate Of Conformity, Meeting V Classification, Led Public Lighting Luminaire - With A Minimum Power Of 150W And A Minimum Luminous Flux Of 21,000 Lumens As Declared In The Inmetro Certificate Of Conformity, Meeting The Classification Of, Electronic Photo Controller Relay - Night Switch On (Ln), Fail Off (Fd / Fail Off), According To Abnt Nbr Set Arm For Fixing An Led Luminaire (Model Br 02), Sodium Vapor Lamp, 70W – 200V Tubular - High Intensity Discharge Lamp (Hid) Of The High Pressure Sodium Vapor Type, Tubular Format, With Nominal Power Of 70 Watts And Operating Voltage D, Sodium Vapor Reactor With External Base With 70W Base 220V - External Electromagnetic Ballast, For Powering A 70 Watt Sodium Vapor Lamp, With Integrated Base For Coupled Photoelectric Relay, External Photocontroller Relay With Bivolt Alternating Current Electromagnetic System, Closed Window, Suitable For Outdoor Installation, Minimum Warranty Of 02 Years, Identified As Low Or High Re, Modular Floodlight Type Led Reflector With Minimum Power Of 1000W – Minimum Luminous Flux Of 100,000 Lumens As Declared In Inmetros Certificate Of Conformity, Modular Floodlight Type Led Reflector With Minimum Power Of 500W – Minimum Luminous Flux Of 55,000 Lumens As Declared In Inmetro Certificate Of Conformity, With: Led Corn Lamp, E-27 Base, With Minimum Power Of 100W, Base – Minimum Luminous Flux Of 10,000 Lumens As Declared In The Inmetro Certificate Of Conformity, Complete Set – Pole And Straight Post Luminaire In Steel Tube, 3M Height, Minimum Diameter Ø152, 4Mm, Wall Thickness 2Mm, With Square Fixing Base (Shoe) 9.5Mm Thick, Galvanized, 10 Mm Wedge Connector - Wedge Type Connector, Made Of High Conductivity Copper Alloy, Intended For The Electrical Connection Of Bare Copper Cables With A Cross Section Of 10 Mm², Used In D Systems, Branch Connector For 0.50 Cable Mm Up To 1.5 Mm - Electrical Derivation Connector, Used For Splices And Derivations Of Copper Electrical Conductors With A Section Between 0.50 Mm² And 1.5 Mm², No Need, Derivation Connector For Cable 1.5 Mm Up To 2, Insulation Puncher Type, Used To Make Splices And Derivations Of Electrical Conductors Copper With Section, Derivation Connector For Cable 4.00 Mm To 6.0 Mm - Electrical Insulation Piercing Type Derivation Connector, Designed To Make Splices Or Direct Derivations In Copper Electrical Conductors, Tapit-Fc 26 Connector - Piercing Type Derivation Connector (Piercing Connector), Suitable For Use In Aerial Networks Low Voltage Electrical Distribution. Allows Electrical Connection Without Stripping, Insulated Splice Sleeve Terminal 1.5/2.5Mm - Straight Splice Sleeve Terminal, Insulated, For Connection Of Electrical Conductors With Nominal Section Of 1.5 Mm. Corp