1) Laying A Thick Polyurethane Surface. 13 Mm (6,446.48 M2 Track + Semi-Circle Behind The Goals, Inrun To The Long Jump) With Line Painting. The Track Consists Of A 6-Lane Circular Track With A Length Of 400 M And A 6-Lane Straight Track. The Inner Radius Of The Curve Is 36.5 M. The Radius Is Measured To The Outer Edge Of The Inner Curb - I.E. The Left Edge Of The Track. The Straight Track For The 100 M And 110 M Hurdles Runs Has A Common Section With The Circular Track. The Total Length Of The Straight Track Is 130M. The Surface Should Have Functional Characteristics That Fall Within The Ranges Described Below:1. Thickness: Min 13 Mm2. Tensile Strength: 0.50 – 0.99 (Mpa)3. Tensile Elongation: 40 – 64 (%)4. Friction Coefficient: 50 – 65 (Trrl)5. Vertical Deformation 23Oc: 1.7 – 2.2 (Mm)6. Shock Absorption At 23°C: 35 - 40 (%)2) Stadium Fence, 2.0 M High, Framed, On Steel Posts Placed In Plinth Sockets - 512 M; Fabrication And Installation Of A Sliding Steel Gate, 8 M Wide, 2 Pieces - These Elements Are Necessary For The Proper Functioning Of The Facility As Part Of The Land Development. Fence Of The Area H = 2 Mfence Of The Retention Tank - 62 M: Fence Consisting Of Panels Made By Welding Horizontal And Vertical Rods Of Various Heights And Diameters, Assembly Posts, Fastening System And Prefabricated Foundation. Construction Panel Fence (Panel Height 2.0 M With A Typical Concrete Plinth, Posts 60X40 Mm).3) Surfaces Made Of Concrete Paving Stones, Thickness. 8 Cm On Cement And Sand Ballast - 463.5 M2 - As Part Of The Development Of The Stadium Area - Parking Lot Construction: - Edges Made Of Concrete Curb 8X30x100 Placed On A Concrete Bench Made Of B10 Concrete; - Concrete Cubes - 8 Cm - Cement And Sand Ballast - 3 Cm - Basic Subbase Made Of Mechanically Stabilized Crushed Aggregate 0-31.5 - 5 Cm - Crushed Aggregate Foundation Layer 0-63Mm - 15Cm - Sand Bedding - 20Cm - Native Soil4) Delivery And Assembly Of Two-Row Cabins For 14 Players. Two-Row Cabin For Reserve Players With A Platform - Solid Polycarbonate Cover, With A Powder-Coated Steel Supporting Structure, Covered With Solid Polycarbonate Plates, 3 Mm Thick. The Cabin Is Equipped With A Cover For The Front Roof Profile, Made Of Foam Covered With Pvc Material, With An Inscription. The Steel Cabin Platform, Protected Against Corrosion By Hot-Dip Galvanizing, Is Finished With Artificial Grass, Aluminum Checkered Sheet And Decorative Aluminum Angle, Aluminum Finishing Of The Elements, Plastic Seats With Backrest - 2 Pcs. 5) Ball Catchers, Height 7 M, Length 50 M, Mounted On Steel Structures, External With Nets - 2 Pcs. Main Elements Ball Catchers Are Steel Poles Made Of Closed Tubular Elements. Protected Against Corrosion By Powder Coating. The Filling Of The Ball Traps Are Polypropylene Nets With A Mesh Size Of 8X8 Cm And A Thickness Of 5Mm. The Nets Are Stretched On Steel Cables Fastened Between The Poles. It Is Recommended To Use A Mesh With A Thickness Of Not Less Than 5 Mm To Ensure Its A
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
