Tall Cabinet - Type Aa Shelves Items And Dimensions 800 Mm X 500Mm X 1600 Mm (Width X Depth X Height). Spm Closet High Shelves. With Three Shelves, The Intermediate Shelf Being Internally Fixed Mini-Fix – 71.10.111.600052-5 Tall Cabinet, With Two Hinged Doors. Structure In Mdf Sheet, With A Minimum Thickness Of 18Mm, Covered On Both Sides With Low Pressure Melamine Laminate, Smooth, Matte Surface, Tops Covered With Pvc Profile, Minimum 2Mm Thick And Without Sharp Edges, In The Same Color As The Laminate. All Cabinets Must Have A 25Mm Thick Top And A Fully Rounded Front Edge (1800). They May Be Made Of Mdf Coated With High-Pressure Melamine Laminate With Postforming Edges Or With Sayerlack Mdf Painting With A Textured Finish, Applied Over Two Coats Of Sayerlack Primer. The Bottom Of The Cabinet Must Be Level With The Side And Have The Same Finish As The Front (Laminate And Pvc Profile). The Lower Top Must Be Equal In Width To The Total Width Of The Cabinet, So That The Sides Of The Cabinet Rest On It. Galvanized Steel Base, Painted With Epoxy Electrostatic Paint, Graphite Gray Color Pantone 432 U. (Ch 14 - 1, 90Mm). Note: The Base Must Be A Frame (Rectangle) Closed With Mdf Sheet Shelves, With A Minimum Thickness Of 15 Mm, In The Same Color As The Laminate. Doors Two Hinged Doors With Opening Equal To Or Greater Than 90º. Made Of Mdf Sheet, Covered On Both Sides With Low Pressure Melamine Laminate, Tops (All) Covered With Pvc Profile In The Same Color As The Laminate. Fixed With Pressure Hinges, Plastipar Type, Or Similar Nickel-Plated. Handle The Doors Will Be Equipped With Thick, Handle-Type Plastic Handles. Lock And Clasp Cylinder Type Lock, With 3600 Rotation, Non-Rotating Tongue, Own Pa, Low Cabinet Item Spm Low Shelf Cabinet - With One Shelf – 71.10.111.600057; Low Cabinet, With Two Hinged Doors: In Mdf Plate, 90Mm) Note: The Base Must Be A Closed Rectangle Frame. Shelves In Mdf Sheet, Tops (All 4) Covered With Pvc Profile, Or Similar, Nickel-Plated. Handle The Doors Will Be Equipped With Solid Plastic Handles, Suitable For Wooden Cabinets, Chrome-Plated, Installed On One Of The Leaves And Two Handle-Type Bolts, Fixed To The Lower And Upper Inner Part Of The Left Door, Corporate Swivel Operational Chair With Arms For General Use Item Spm Swivel Chair – Purple Pbms - 71.10.111.600061. Seat And Back Set Made Of A Double Upholstered Shell, Equipped With A “Syncron” Type Synchronized Tilt Mechanism. Seat, Back And Armrests Equipped With Independent Height Adjustment. Covering In 100% Wool Fabric In Purple Color Ref.: Pantone 262 C Or C:57 M:92 Y:12 K:56. Base (Paw) In Tubular Metal Structure With Protective Cover Injected In Engineering Resin And Double Swivel Casters Injected In Polyamide (Nylon 6), Both In Graphite Color Pantone Chromatic Ref. 425C. Backrest Low Backrest, Composed Of A Certified Multilaminated Plywood Core, Minimum Thickness Of 10 Mm (Consisting Of A Minimum Of 5 Sheets), Anatomically Hot Molded Or Injected In Thermoplastic Resin (Polypropylene Or Polyamide) With Anatomical Curvature And Rib System On The Back To Guarantee Mechanical Resistance. All Edges Rounded, No Sharp Edges. Upholstered On The Front Surface In High-Flexible Injected Polyurethane Foam
