End, Type: With Flange And Tip, Material: Cast Iron, Nominal Diameter: 400Mm, Pressure Class: Pn10 - End, Pressure Class: Pn10 Technical Specification: Flange End And Tip, Made Of Ductile Cast Iron, According To Abnt Nbr 7675:2005. With Flange Pressure Class Pn10. Externally And Internally Coated With Bituminous Paint, Compatible With Je2gs, Jm And Jti Model Bags In Accordance With Abnt Nbr 7675:2005. Inspection And Receipt According To Standard Abnt Nbr 7675:2005 Annex D - Control And Manufacturing Process. Samae Inspection Level: C, Sleeve, Type: Reduction, Model: With Elastic Joint Bags (Je2gs), Material: Ductile Cast Iron, Diameter: 400 Of Standard Nbr 13747 (Or Current Standard), With Rubber Ring (According To The Requirements Of Standard Nbr 7676:2005, Or Current Standard) In Sbr (Synthetic Rubber - Styrene-Butadiene Polymer), Coated Internally And Externally With Anti-Corrosive, Adherent, Non-Sticky Enamel, Or With Epoxy Powder Paint, Supplied With Corresponding Rubber Rings, For Drinking Water Distribution Networks, For Pipes Manufactured According To The Requirements Of Standard Nbr 7675:2005 (Or Current Standard). The Material Must Bear On Its External Surface In High Relief: The Year Of Manufacture, Dn, Pn, Manufacturers Brand, Code That Allows The Traceability Of The Product To Be Obtained. Identification Of The Ductile Iron Used, Standard No. (Nbr 7675:2005 Or Current Standard). Pressure Class K12. Only Materials With A Maximum Of 2 Years Of Manufacture Will Be Accepted, That Is, The Current Year Or Immediately Previous., Tube, Type: With Tip And Je2gs Bag, Nominal Diameter: 300Mm, Pressure Class: K7 - Tube, Pressure Class: K7 Technical Specification: Centrifuged Ductile Cast Iron Tube, For Pressure Pipelines, As Per Abnt Nbr Standard 7675:2005, With Spheroidal Graphite Greater Than Or Equal To 95% Or Degree Of Nodularization Greater Than 80%, Class K7 Dn 300Mm, Externally Coated With Metallic Zinc, With 200 G/M², According To Standard Abnt Nbr 11827:1991 And Bituminous Painting. Internally Coated With Blast Furnace Cement Mortar In Accordance With Abnt Nbr 8682:1993 Standard, With Je2gs Model Bag In Accordance With Abnt Nbr 13747:1996 Standard, With Rubber Ring For Elastic Joint In Accordance With Abnt Nbr 7676:1996 Standard. Inspection And Receipt According To Standard Abnt Nbr 7675:2005 Annex D - Control And Manufacturing Process. Samae Inspection Level: C (As Per Notice)., Te, Reduction, With Je2gs Elastic Joint Bags, Size: Dn 300 Mm Ductile Cast Iron Reduction Te, Pn16, With Je2gs Elastic Joint Bags In Accordance With Nbr 13747, Manufactured In Accordance With Nbr 7675:2005, For Pipes Manufactured In Accordance With Nbr 7675:2005., Fluffy Bend 90° 100 Mm - Fluffy Bend 90° 100Mm Bend 90° Ff Ductile With Elastic Joint Bags Dn 100 90° Ductile Cast Iron Bend, With Elastic Joint Bags Type Je2gs According To Nbr 13747, Manufactured In Accordance With Nbr 7675, For Drinking Water Distribution Networks., 17/03/2026 - 14:33:33, 03/17/2026 - 14:34:33, 03/17/2026 - 14:35:03, 03/17/2026 - 14:35:33
