Bids Are Invited For Registration Of Prices For The Acquisition Of Protective Equipment For Employees Of The Municipal Urban Janitorial Secretariat.

Lot 1 - Flexible Polyethylene Signaling Cone. Height 75Cm. Color: Orange And White. It Has Reflectors With A Minimum Reflectivity Of 360 Candelas/Lux/M2 And A Minimum Width Of 10 Cm., Lot 1 - Polyethylene Barrel Type Cone. Orange Color. It Has Three Reflective Strips 63 Mm Wide. Carrying Handle. Approximate Measurements: Total Height 1110 Mm. Base Height: 260 Mm. Width: 557 X 552 Mm. Top Diameter: 395 Mm. Stackable Model, Lot 1 - Zebrad Tapes Made From A Non-Adhesive Polyethylene Film Or High-Resistance Pvc, Compatible With Use On Concrete. Printed In Two Colors (Yellow And Black). Dimensions: Roll Of 70Mm Padded, Bi-Color Bi-Density Direct Injection Sole (Bi-Density Polyurethane Injected Directly Into The Upper). Meets All Standards And Safety Certificate From The Ministry Of Labor. Numbering From 35 To 45 (Brazil Standard). Present Certificate Of Approval (Ca), Lot 2 - High-Top Occupational Boot (32Cm), Type D, Classification Ii, Waterproof. Resistant To Chemicals And Solvents. Color:Black. Upper Made Of Pvc (Polyvinyl Chloride). With Internal Lining. Non-Slip Sole. Present Certificate Of Approval (Ca), 03/16/2026 - 18:32:26, Lot 3 - Safety Belt With Y-Lanyard, With The Following Minimum Features: A) Parachutist Type Safety Belt Made Of Polyester Tape Umbilical In Polyester Loop For Suspension And Rescue, 1 Type D Steel Ring For Dorsal Connection And 2 Side Steel Half Rings For Positioning; C) Must Have A Quick Adjustment System For The Front Suspenders, On The Sides Of The Abdominal Belt And On The Rear Straps Connecting The Legs To The Belt By Means Of Buckles, Not Allowing The Opening Or Sliding Of The Belt Straps D) Have Eva In The Lumbar Region And Legs; E) Comes With A Double Y-Shaped Safety Lanyard, Made Of Synthetic Laces (Polyester Or Polyamide) And A Breaking Load Of 15 Kn. Present Certificate Of Approval (Ca), Lot 3 - Fall Arrester Printed In Stainless Steel, Hinged Closure, With Two Safety Locks, One Threaded And The Other Plug-In, Locking System With Rounded Beams; Energy Absorber, Made Of High-Resistance Polyester Tubular Tape, With Plastic Protective Cover. It Has A Class B Connector, Made Of Steel, With A Thread Lock, With An Opening Of 17 Mm, At The End That Anchors It To The Belt. User Weight: From 60 Kg To 140 Kg – Including Equipment. For 12 Mm Synthetic Rope. Weight 820 G. Complies With Standard Nbr 14.626:2010. Present Certificate Of Approval (Ca.), Lot 3 - Black Knitted Safety Glove To Protect Hands Against Abrasion, Made Of Mixed Cotton And Polyester Yarn In Black, Knitted In 4 Threads In A Single Piece, Elastic Cuff, With Pigment In The Shape Of A Black Pvc Ball On The Palm And Fingers, Ergonomic Shape. Present Certificate Of Approval (Ca., Lot 3 - Safety Glove Made Of Cowhide Leather, Short Shaft Against Mechanical Risks, Safety Cuff With Elastic