Bids Are Invited For Price Registration For Eventual Hiring Of Legal Entity(Ies) Specialized In The Supply Of Furniture In General, Permanent Equipment And Household Appliances, Aiming To Meet The Demands Of The Municipal Secretariats Of Paulo Ramos/Ma

Air Conditioner, 12,000 Btus (Condenser And Evaporator) Inverter, 220 Volt Power Supply, Split Type, With Remote Control. Class A In Energy Consumption., 9,000 Btus (Condenser And Evaporator), 18,000 Btus (Condenser And Evaporator), 24,000 Btus (Condenser And Evaporator), Fixed Polypropylene Chair, Seat, Back And Ends In Injected Polypropylene, Metallic Structure In 7/8 In Tube Wall 20 Welded In The Mig System, All Metallic Parts Must Be Treated In Chemical Bath Sets, With Anticorrosive Treatment, Painting Must Be Electrostatic With Epoxy Paint (Enamel)., 16/03/2026 - 18:42:46, Swivel Desk Chair Without Arms, With Injectable Height Adjustment. Minimum Dimensions: Seat Measuring 41Larg Fixed For Placing The Board, All Of It Assembled Using Mig Welding. Backrest And Seat Structure Oblong Tube Approximately 30X16 Mm Made Of #16 Plate (1.50 Mm) Thick, With Trapezoidal Shaped Seat Base (Four Feet). It Has 02 (Two) Lower Latches And 02 (Two) Upper Latches On The Sides, Thus Avoiding Opening The Structure By Rigid Movement, With A 7/8 Tube Made Of Sheet Metal #16 (1.50 Mm). The Structural Part Of The Board Is Made With 02 (Two) Pedestals Welded At 90º Vertically On The Side And 01 (One) Front Welded At 65º Diagonally, 50Mm), With 01 (One) Support For Bag Or Purse Holders. ¼ Smooth Solid Profiled Wire Book Holder In Number 07 (Seven), Individually Welded With Mig Welding, With Bulkhead On The Back. Finishes In Steel Material Are Welded With Electronic Mig Welding, And Anti-Rust Treatment Is Applied To The Metal Parts. Painting Of Metallic Elements In Epoxy-Powder Paint, Electrostatic, Glossy, Polymerized In An Oven, Minimum Thickness Of 40 Micrometers In White. The Lower Ends Of The Feet Must Contain Injected Nylon Toes. Certified By Inmetro., Individual Student Set (1 Box), Consisting Of 1 (One) Table And 1 (One) Chair For Student Sizes From 0.93M To 1.16M. The Ends, Seats, Backrests, Book Holders, Top In Mdf Or Mdp, Bushings Must Be Made Of Injected Polypropylene. Rectangular Top With Rounded Corners, Equipped With A Rectangular Channel With A Trapezoidal Profile To Fit Into The Table Top For Positioning A Tablet And/Or Cell Phone And Fixing The Top With At Least 6 Screws. Minimum Finished Dimensions 600 Mm (Width) X 450 Mm (Depth). Seat And Back Fixed To The Metal Structure By 4X16 Rivets. Structure Composed Of Vertical Uprights And Longitudinal Crossbeam Made Of Carbon Steel Tube; Upper Beam Made Of Carbon Steel Tube, Curved In A “C” Shape, With A Circular Section Of Ø = 31.75 Mm (1 1/4”); Legs Made Of Carbon Steel Tube With A Circular Section Of Ø = 38 Mm (1 1/2”), Chair Made Of Carbon Steel Tube Ø = 22.22 (7/8). All Metallic Parts Must Be Treated In Chemical Bath Sets, Painting Must Be Electrostatic With Epoxy Paint (Enamel). Certified By Inmetro., Individual Student Set (Cja 3), Consisting Of 1 (One) Table And 1 (One) Chair For Student Sizes From 1.19M To 1.42M. The Tips, Top In Mdp Or Mdf And Bushings Must Be Made Of Injected Polypropylene. Rectangular Top With Ca