Industrial Straight Sewing Machine, Containing At A Minimum: A Button For Stitch Adjustment, A Thread Holder For Two Cones, A Stitch Size Regulator Button From 1 To 6, Rewind Lever, A Bobbin Reloader, Automatic Lubrication, A Needle, Fixed Stitch, To Operate With 4500 Stitches For One Minute Without Adding Accessories, As A Complement The Machine Must Be Delivered On A Table Support With Top Covered In Formica In The Following Measurements 0.50M X 1.10M For Up To 85Cm, Industrial Pedal Measuring 25 Two-Phase Torque Motor., Industrial Overlock Sewing Machine, Containing At Minimum: 3 Stitch Adjustment Buttons, A Differential For Various Types Of Fabrics, A Thread Holder For Cones, A Silicone Pad, To Operate With 7,000 Stitches Per Minute Without Adding Accessories, Domestic Straight Sewing Machine, Has 10 Basic, Utility And Decorative Stitches. It Has 9 Stitches: Basic (Straight/Zigzag), Essential (3 Stitches/Invisible Hem) And Decorative. Buttonhole In 4 Steps. Free Arm Facilitates Sewing On Sleeves, Cuffs And Hems. Stitch Length Adjustable, Zigzag Width Adjustable. 2 Needle Positions In Straight Sewing. Teeth Insulator Plate For Free Embroidery And Button Sewing. Sewing Multiple Layers Of Jeans. Accompanies Speed Controller Pedal Up To 750 Points Per Minute. Internal Metal Structure That Increases Sewing Stability. Voltage 220 V., Industrial Gallon Machine, Chain Stitch Machine, Automatic Lubrication System, High Speed 6000 Rpm Machine And Low Noise Level, Transport System With Easy-To-Handle Differential, Simple Transport System Using Feeding Teeth, Easy-To-Handle Stitch Length Adjustment System. Timing Belt Transmission System, Upper And Lower Braiding System, Upper And Lower Silicone Reservoir System, Eye, Finger And Strap Protectors. Bias Applicator Device, Gallon And Others Can Be Adapted. 03 Needles, 05 Threads. Maximum Length Of 4.4 Mm. From The Point. 6000 Stitches Per Minute, 1/2 Hp Motor, Bivolt 110 V/220 V., Industrial Sewing Machine, Flat Interlock Type, Function: Simultaneous Sewing And Overcasting (Edge Finishing), With Safety Stitch (Chain Stitch) To Prevent The Fabric From Fraying. Ideal For Closing Garments That Require Extra Fastening, Such As The Sides Of Pants. Thread And Needle Configuration: Number Of Needles: 2 (Two). Number Of Wires: 5 (Five). Motor: Type: Direct Drive (Motor Directly Coupled To The Head), For Greater Energy Savings And Speed Control. Power: Minimum 500W To 550W. Supply Voltage: Automatic Bivolt Or Voltage Specification (Ex: 110V/220V), Depending On The Needs Of The Installation Location. Additional Motor Features: Stand-By Function, Needle Positioner, Speed Control. Performance: Maximum Speed: Minimum 6,000 Points Per Minute (Ppm). Stitch Length: Adjustable, Generally Up To 3.6Mm Or 4.0Mm. Lubrication System: Automatic, With Sealed Needle Bar (Sealed Crankcase System) Pa
