Bids Are Invited For Acquisition Of Equipment And Materials For Tire Maintenance.

Tire Air Cannon Equipment Intended For Rubber Shops To Quickly Seat Tire Beads On The Wheels Of Light Vehicles, Passenger Cars, Utility Vehicles, Buses, Trucks And Heavy Machinery. The Air Cannon Enables The Initial Seal Between The Tire And The Rim, Essential For Starting The Filling Process With Compressed Air, Especially In Tubeless Tires. Minimum Reservoir Capacity Of 20 Liters Maximum Working Pressure Of At Least 120 Psi Pounds Per Square Inch Integrated Analog Or Digital Pressure Gauge To Control Internal Pressure Before Release Built-In Safety Valve Calibrated To Prevent Overpressure, Pneumatically Operated Impact Wrench Intended For Heavy Duty Mechanical Maintenance, Workshop And Rubber Shop. With Ergonomic Body And Trigger Drive With Speed ​​Adjustment. Main Technical Specifications Pneumatic Type. Socket Inlet Measurement 3 4 . Torque Of At Least 1,500 Nm Minimum Rotational Speed ​​Of 4,200 Rpm Operating Pressure 90 Psi 6 2 Bar. Impact Hammer Mechanism For High Torque And Lower Recoil Air Inlet 3 8 . Accessories Included: 04 Four Hardened Steel Sockets In Measurements 24 27 32 And 33 Ensuring Safety And Stability During The Process Preservation Of The Wheels It Has Several Accessories To Protect The Wheels During The Assembly And Disassembly Process Durability, Automotive Elevator Minimum Load Capacity 4000 Kg Electric Motors 2X4 Hp Electrical Voltage 220 380V Three-Phase Lifting System 2 Spindles In Drawn Steel Sae 1020 With Working And Safety Threads And Nuts In Nylon 6.6 Jacketed In Steel Chain And Gear Transmission Manual Lever Drive With Electric Reversing Key Monobloc Columns In Astm A36 Steel Without Welds And Seams Minimum Height Of 2,480 Mm Base Width Minimum Of 3,400 Mm Base Length Minimum 1,300 Mm Width Between Columns Minimum 2,700 Mm Width Between Carts Minimum 2,500 Mm Lifting Time Maximum 48 Sec Including Equipment Assembly, Cold Stain Minimum Measurement 85 Mm Number Of Plies 2 Box Of 20 Units Intended For Repairing Bias Tires For Damage To The Tread And Shoulders. Its Manufacturing Follows The Same Direction As The Plies Of The Diagonal Tire Carcass., 03/14/2026 - 09:21:19, 03/14/2026 - 09:21:23, Cold Spot Minimum Measurement Of 160Mm In Diameter. Number Of Tarpaulins 4. Box With 10 Units. Intended For Repairing Bias Tires For Damage To The Tread And Shoulders. Manufacturing Follows The Same Direction As The Plies Of The Diagonal Tire Carcass., Cold Spot Minimum Measurement 100Mm Diameter Box With 10 Units. Intended For Repairing Bias Tires For Damage To The Tread And Shoulders. Its Manufacturing Follows The Same Direction As The Plies Of The Diagonal Tire Carcass., Centralized Radial Patch Measures 75X55 Mm. Number Of Tarpaulins 1. Box Copm 20 Units. Patches Are Intended For Repairing Bias Tires For Tread And Shoulder Damage. Its Manufacturing Follows The Same Direction As The Plies Of The Diagonal Tire Carcass., Gallon Of Solid Vaseline For 3 Kg Rubber, Box With 120 Patch Units For 4Mm Damage. Compress