Execution Of Public Lighting Services - Service Team Equipped With A Motor Vehicle, With A Capacity Of 2 Tons, With A Lifting Device, Articulating Telescopic Boom With Hydraulic Drive By The Vehicles Own Engine. Hydraulic Stabilizers In “A” Or “H”, For Inclined Or Vertical Movements. Bucket (Basket) Made Of Fiberglass Insulating Material With A Minimum Capacity Of 120 Kgf, In Accordance With Standard Nr-35. Reach Height 22 Meters, Consisting Of A Trained Electrician And A Driver, And Support Team Supervision, Equipped With Individual And Collective Protective Equipment, Tools And Operational Equipment, To Carry Out Public Lighting Maintenance Services, Removing, Replacing, Installing Materials, Equipment And Accessories Components Of The Ip System, During The Day And Night Shift, From Monday To Friday., 40W Led Public Luminaire - Body: Made Of Extruded Aluminum Or Injected Aluminum, With Aluminum Fins Of At Least 1Cm In Height For Correct Heat Dissipation, Smd Led, Color Temperature 5,000K, Lens: Polycarbonate With Uv Retardant (Lights With Refractor Will Not Be Accepted Secondary In Glass). Led Module With Mcpcb Type Printed Circuit Board. Power Factor Of At Least 0.95, Luminous Flux: Minimum Of 6,800Lm, Painting: Electrostatic Powder In Munsell Gray N6.5, Fixing On Arms With External Diameters Varying From 25.4Mm; 33Mm; 48.4Mm And 60.3Mm. Minimum Luminous Efficiency Of 170Lm/W. Luminaire Lifetime Of At Least 100,000 Hours. Irc (Color Reproduction Index) ≫ 70. Total Harmonic Distortion (Thd) 10%. 10Kv / 15Ka Surge Protection. Dimmable Driver. With 7-Pin Base Compatible With Remote Management (Ip66 Protection), Angle Adjustment With Variation Of 5 Degrees (+20° / -20°), With Pressure Control Valve, Easy Installation And Fixing Using Hexagon Screws. Warranty Given By The Manufacturer Of 5 Years. Minimum Degree Of Protection Against Water And Dust Ip66. Minimum Impact Protection Degree Ik09. The Luminaire Must Not Have Holes Or Cavities That Accumulate Dirt Or Allow Insects To Enter. The Public Led Luminaires To Be Supplied Must Have A Technical Configuration That Ensures The Independence Of Their Leds. This Feature Aims To Ensure That, In The Event Of Failure Or Extinguishment Of One Or More Leds, The Others Remain In Full Operation Until The Necessary Maintenance Or Replacement Is Carried Out. The Luminaire Must Be Delivered Completely Assembled, With A 4-Meter Connection Cable, Connected Directly To The Dps, Without Any Amendments., 60W Led Public Luminaire - Body: Made Of Extruded Aluminum Or Injected Aluminum, Luminous Flux: Minimum Of 10,200Lm, 80W Led Public Luminaire - Body: Made Of Aluminum Extruded Or Injected Aluminum, Luminous Flux: Minimum 13,600Lm, 100W Led Public Luminaire - Body: Made Of Extruded Aluminum Or Injected Aluminum, Luminous Flux: Minimum 17,000Lm, 13/03/2026 - 13:38:36, Led Public Luminaire 120W - Body: Made Of Extruded Aluminum Or Injected Aluminum, Luminous Flux: Minimum Of 20,400Lm, 240W Led Public Light - Body: Made Of Extruded Aluminum Or Injected Aluminum, Luminous Flux: Minimum Of 40,800Lm, Relay Photo Controller - Voltage: 105~305V; Operating Frequency: 50/60Hz; Consumption: <1W Or 10Va Capacitive; Brightness To Turn On: Between 5 And 15 Lux; Brightness To Turn Off: Up To 30 Lux; Its
