Request For Quotation Purchase Of Household Goods (Tools For Welding Work)

Welding Torch. Welding Wire Diameter, Mm 0.6-1. Length, M 4. Welding Current At 50% Duty Cycle In Co₂, A 160. Welding Current At 50% Duty Cycle In A Gas Mixture, A 130. Type Of Cooling Air. Possibility Of Replacing The Gander. The Bending Angle Of The Gooseneck Is 40°. Flexible Power Cable. Wear-Resistant Coating Of Power Cable. Reliable Fixation In The Hand Due To Rubber Inserts In The Handle. Smooth Trigger. Suitable For All Welding Machines With Euroadapter., Acetylene Generator. Equipment: With Pressure Gauge. Material: Steel. Nominal Capacity, Cubic M/H: 0.5. Working Pressure, Kgf\Cm2: 1.5. Working Gas: Acetylene. Single Loading With Carbide, Kg: 1.0. Gas Consumption, M3/H: 0.5 Operating Temperature, °C: -20 - +30. To Ensure Sealing, It Is Equipped With A Lid With An Additional Seal, A Screw Clamp And A Safety Valve., Clamp For Oxygen Hoses 6 Mm. Clamp Material: Stainless Steel., Propane Reducer. Medium: Propane. Maximum Operating Gas Pressure: 0.3 Mpa. Maximum Gas Pressure At The Inlet: 2.5 Mpa. Maximum Throughput: 5 M³/H. Housing Material: Aluminum. The Pressure Gauge Must Be Verified., Holder For Welding 500 A And 800 A. Holder For Manual Arc Welding (Mma). Rated Current: Left - 800 A (Sv-800Amp), Right - 500 A (Sv-500Amp). Connection For A Welding Cable With A Cross-Section Of At Least 70–95 Mm². Conductive Jaw Material: Copper (Solid Copper Clamps For Reliable Contact). Housing: Impact-Resistant Heat-Resistant Plastic (Black). Clamp Lever: Metal With Plastic Coating. Handle: Cylindrical, Grooved For Comfortable Holding. Availability Of A Product Passport., Oxygen Hose, Gas Hose For Gas Welding. Diameter 6Mm, Wall Thickness 4.5Mm. Cove Length: 40M., The Propane-Oxygen Injection Cutter Is Designed For Cutting, Cutting And Heating Parts, Blanks, Sheets And Rolled Products Made Of Ferrous Metals. Combustible Gas: Propane. Type Of Welding/Cutting: Gas Cutting. Design: Lever. Maximum Thickness Of The Metal Being Cut: 300 Mm. Oxygen Inlet Pressure Not Less Than: 3.50–10.00 Kgf/Cm ²The Cutter Is Equipped With Four Internal Mouthpieces. Propane Inlet Pressure Is Not Less Than: 0.01–1.50 Kgf/Cm². Oxygen Consumption When Operating On Propane: 4.10–33.20 M³/H. Propane Consumption: 0.41–0.86 M³/H. Connecting Dimensions: Universal Nipple D 6/9, Welding Cable Kg 1X16 In Rubber Insulation. Cable Cross-Section, Mm2: 16. Conductor Material: Copper., Steel Cylinder For Storing And Transporting Gaseous Oxygen. Cylinder Volume: 20 Liters. Valve Type: Oxygen, With Right-Hand Thread. Body Material: Seamless Steel. Equipment: Cylinder Assembly, Oxygen Valve, Protective Cap. Factory Markings (Number, Date Of Manufacture, Quality Control Mark) And A Product Passport With A Note On Hydraulic Testing Are Required., Ground Clamp (Ground Terminal) For Welding. Permissible Current Load 300 A.