Steel Wedge Valve With Extending Spindle 30S64nzh Dn 200Mm, Pn 25, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam, Liquid Non-Aggressive Petroleum Products, Liquid And Gaseous Ammonia, Natural Gas. Connection To The Pipeline: Flange. Working Environment Temperature: From -40°C To +425°C. Valve Tightness Class A According To Gost 9544-2015, Gost R 54808-2011. Material Of Body, Cover, Wedge: Steel 20L. Material Of Spindle, Saddles: Steel 20Х13. Bearing: Thrust Ball. Gasket: Trg. Stud, Bolt, Eye Bolt: Steel 35. Face-To-Face Length: 400Mm. Weight: Not Less Than 140 Kg. The Wedge Is A Spacer Type, Not Attached To The Spindle. Must Move Freely Inside The Body, Ensuring A Tight Fit To The Seats When Closing And Free Movement When Opening. Steel Wedge, Anti-Corrosion Coating. The Flywheel Is Made Of Durable Material (Steel, Resistant To Loads During Operation) Provides Convenient And Durable Control Of The Valve. Bronze Bushing. Spindle Nut – Steel. The Supplied Equipment Meets The Requirements Of Gost 5762-2002, Gost R 55511-2013, Gost 34610-2019. The Supplier Categorically Does Not Allow The Supply Of: Equipment With Existing Corrosion And Rust, Repaired, Refurbished, Or Used. It Is Not Permissible To Apply Paint On Internal Surfaces (Pipes, Seats, Wedges) And Shut-Off Valve Components. The Internal Surfaces Of The Shut-Off Valves Will Necessarily Be Treated With An Anti-Corrosion Coating. The Following Data Must Be Displayed On The Valve Body: Trademark Of The Manufacturer, Dn (Mm), Pn (Kgf/Cm2), Body Material, Brand (Designation), Serial Number. This Information Will Be Duplicated On The Nameplate (Gost 4666-2015). Set Of Shipping Documents: 1) Passport With A Detailed Drawing, For Each Supplied Valve Separately. The Passport Must Contain Quality Control Marks And Manufacturers Seals (Original). St Rk Iso 6002-2010, Gate Valve 30S907 Nzh Du 400 With Electric Drive. Gost 9698-86. Working Medium: Water, Steam, Oil, Materials Used In The Valve Are Corrosion-Resistant. Working Environment Temperature: From −40°С To +425°С. Operating Conditions: U1. Minimum Ambient Temperature: −40°С Material Design Of The Valve 30S964nzh. 1. Housing: Steel 25L. 2. Cover: Steel 25L. 3. Wedge (Discs): Steel 25L. 4. Spindle: 20Х13. 5. Spindle Nut: Brass Ls59-1. 6. Nut: Carbon Steel Gost 1050-88, Strength Class Not Lower Than 5 According To Gost 1759.5-87. 7. Stud, Bolt: Carbon Steel Gost 1050-88, Strength Class Not Lower Than 5.6 According To Gost 1759.5-87. 8. Hinged Bolt: Steel 35. 9. Seal Between The Body And The Cover (Gasket, Ring): Paronite, Trg. 10. Oil Seal Packing: Agi, Trg. 11. Bearing: Thrust Ball. 12. Surfacing On The Ring In The Body: 07Х25н13, 08Х21н10г6. 13. Surfacing On A Wedge: 13Х25т, 10Х17т, Analogue Of Z94oh -16C, Z941h-25 Do Not Offer. The Supplier Categorically Does Not Allow The Supply Of: Equipment With Existing Corrosion And Rust, Repaired, Refurbished, Or Used. It Is Not Permissible To Apply Paint On Internal Surfaces (Pipes, Seats, Wedges) And Shut-Off Valve Components. The Following Data Must Be Displayed On The Valve Body: Trademark Of The Manufacturer, Dn (Mm), Pn (Kgf/Cm2), Body Material, Brand (Designation), Serial Number. Set Of Shipping Documents: 1) Passport With A Detailed Drawing, For Each Supplied Valve Separately. The Passport Must Contain Quality Control Marks And Manufacturers Seals (Original). If The Equipment Is Foreign-Made, The Passport Will Be Factory-Made And Made In The Official Language Of The Country Of The Equipment Manufacturer. In This Case, The Supplier Must Provide A Notarized Translation Into Russian. 2) Operation Manual, 3) Certificate Of Origin Of Goods, 4) Declaration Of Conformity. St Rk Iso 6002-2010, 30S64nzh Dn 80Mm, Pn 25 Tartylatyn Spindles Bar Synap Bolat Ysyrma, Shykkan Zhyly 2026 Zhyldan Erte Emes. Zhumys Ortasy: Su, Bu, Suyyk Aggressive Emes Munai Onimderi, Suyyk Zhane Gas Sorizdi Ammonia, Tabig Gas. Handle: Flanges. Zhumys Ortasyn Temperature: -40°C - Tan +425°C - Valid. Housing Materials, As Well As Son: Bolat 20L. Spindle Materials, Saddles: Bolat 20X13. Toseu: Trg. Stud, Bolt, Whatever Bolt: Bolat 35. Kurylys Uzyndygy: 280 Mm. Salmagy: Who Degende 33 Kg. Son Tәrіzdi (Rasporly) Wedge Spindelge Bekіtilmegen. The Whole Body Is The Same As The Yoke, The Toad Is In The Saddle, And The Saddle Is In The Same Place. Wedge Bolattan Zhasalgan, Corrosion Karsy Zhabynmen Kaptalgan. Flywheel Berik Materialdan (Bolat, Paydalanu Kezіndegі Zhuktemelerge Tozіmdi) Zhasalyp, Ysyrmana Yngaily Arі Uzak Merzіmdі Baskarud Kamtamasyz Etedi. Bushing – Kola. The Nut Spindle Is Bolat. Zhetkіzіlgen Zhabdyk Memst 5762-2002, Memst R 55511-2013, Memst 34610-2019 Talaptaryna Saykes Keledi. Zhetkіushі Uzіldі-Kesіldі Zhekіzіlіmge Zhol Bermaidi: Koldanystagy Corrosion Mentoty Bar, Zhondelgen, Kalpyna Keltirilgen, Paidalanylgan Zhabdyktar. Ishki Betterge (Kelte Kubyrlar, Sedlolar, Son) Zhane Bekitu Armaturasynyn Toraptaryna Lac-Boyau Zhabynyn Zhaguga Zhol Beriilmeydi. Bekitu Fittings Son Ishk Betteri Mindetti Turde Korroziya Karsa Zabynmen Undeletin Bolady. Ysyrma Casings We Give Derekter Korsetіluі Tiіs: Daysyndushy Zauyttyn Tauar Belgіsi, Dn (Mm), Pn (Kgf/Cm2), Body Materials, Markings (Belgіlenuі), Zauyttyk Nomіrі. Bul Akparat Taktaishada Kaytalanady (Memst 4666-2015). Tauarga Ilespe Kuzhattar Zhiyntygy: 1) Arbir Koyylgan Ysyrmaga Zheke-Zheke Egzhey-Tegzheyli Syzbasy Bar Passport. Belgileri Quality Control Department Passports, Days Of Zauyttyn Morleri (Tupnuska) Bolyu Tyіs. St Rk Iso 6002-2010, Steel Wedge Valve With Extending Spindle 30S64nzh Dn 150Mm, Pn 25, Year Of Manufacture Not Earlier Than 2026. Working Medium: Water, Steam, Liquid Non-Aggressive Petroleum Products, Liquid And Gaseous Ammonia, Natural Gas. Connection To The Pipeline: Flange. Working Environment Temperature: From -40°C To +425°C. Valve Tightness Class A According To Gost 9544-2015, Gost R 54808-2011. Material Of Body, Cover, Wedge: Steel 20L. Material Of Spindle, Saddles: Steel 20Х13. Bearing: Thrust Ball. Gasket: Trg. Stud, Bolt, Eye Bolt: Steel 35. Face-To-Face Length: 350Mm. Weight: Not Less Than 86 Kg. The Wedge Is A Spacer Type, Not Attached To The Spindle. Must Move Freely Inside The Body, Ensuring A Tight Fit To The Seats When Closing And Free Movement When Opening. Steel Wedge, Anti-Corrosion Coating. The Flywheel Is Made Of Durable Material (Steel, Resistant To Loads During Operation) Provides Convenient And Durable Control Of The Valve. Bronze Bushing. Spindle Nut – Steel. The Supplied Equipment Meets The Requirements Of Gost 5762-2002, Gost R 55511-2013, Gost 34610-2019. The Supplier Categorically Does Not Allow The Supply Of: Equipment With Existing Corrosion And Rust, Repaired, Refurbished, Or Used. It Is Not Permissible To Apply Paint On Internal Surfaces (Pipes, Seats, Wedges) And Shut-Off Valve Components. The Internal Surfaces Of The Shut-Off Valves Will Necessarily Be Treated With An Anti-Corrosion Coating. The Following Data Must Be Displayed On The Valve Body: Trademark Of The Manufacturer, Dn (Mm), Pn (Kgf/Cm2), Body Material, Brand (Designation), Serial Number. This Information Will Be Duplicated On The Nameplate (Gost 4666-2015). Set Of Shipping Documents: 1) Passport With A Detailed Drawing, For Each Supplied Valve Separately. The Passport Must Contain Quality Control Marks And Manufacturers Seals (Original). St Rk Iso 6002-2010
