Tenders Are Invited For Expansion Of Street Lighting In The Koszęcin Commune

1. Construction Of Street Lighting In The Koszęcin Commune - Ul. Drzymały In Łazy Kurzychowe, 42-288. There Is No Road Lighting On Drzymały Street. The Project Involves The Construction Of 14 Light Points To Illuminate The Above-Mentioned Areas. Street.2. For Road Lighting, Luminaires With A 32.1W Led Light Source, Ip66, Ik09, And 10Kv Surge Protection Were Designed. The Luminaires Should Be Mounted On 8.0 M High Steel Poles. Use Luminaires With A Color Temperature In The Range Of 4000K. Round Poles, Steel - Galvanized, With A Wall Thickness Of 3 Mm, Built On F-120/43 Prefabricated Foundations, Should Be Placed In Accordance With The E-2 Land Development Plan. Use Izk Connectors In The Poles. Insert Ydyżo 3X2.5Mm2 Wires Inside The Pole, Run In A Flexible Protective Tube, Which Will Power The Led Fixture. Other Poles And Lighting Fixtures May Be Used After Approval By The Investor, While Maintaining Analogous, Equivalent Technical Properties.3. The Scope Of Work Includes: - Street Lighting Cable Line - Yakxs Cable 4X35mm2 - Installation Of Street Lighting Poles - 8 M - Suspension Of Led Luminaires - 32.1 W - Anti-Shock Installation. 4. The Designed Lighting, In Accordance With The Received Connection Conditions, Will Be Powered From A Separate Lighting Line Powered By The Transfer Station. Sn/Nn Czz30615 Kurzychowe, And The Place Of Demarcation Of Ownership And The Boundary Of Operation Will Be The Current Terminals On The Street Lighting Cable On Pole No. 12 (Czz144119) Towards The Designed Installation. For This Purpose, An Rsa Disconnector Should Be Installed On The Above-Mentioned Pole And Then A Section Of The Cable Line Should Be Built To Supply The Designed Lighting. The Designed Lighting Poles Will Be Powered By A Yakxs 4X35mm2 Cable Line, And The Cables Should Be Laid In Accordance With N Sep -E-004 Electricity And Signaling Cable Lines. Design And Construction Under The Road Using The Trenchless Method At A Depth Of 1.0 - 1.4 M, And The Remaining Extent At A Depth Of 0.7 M On A 0.1 M Thick Sand Bed. Under The Sidewalks, Cable Place In A Ø110mm Pipe. Cover The Laid Cable With Sand, A 0.15 M Thick Layer Of Soil And Blue Foil. At Intersections With Roads, Exits And Existing Infrastructure, Run The Cable In A Thick-Walled Protective Pipe. Lay The Cables In The Trenches In A Wavy Line. At The Streetlights, Leave Enough Cables With Lengths In Accordance With The Standard. Cables Should Be Provided With Markers Placed Every 10 M, And At All Entries Into Pipes And Culverts And At Intersections With Existing Utilities, Made Of Material That Is Difficult To Degrade, With Permanent Inscriptions On Them Containing: - Symbol And Registration Number Of The Cable - Cable Type And Cross-Section - Year Of Construction - Rated Voltage - Cable Users Mark. Before Starting Earthworks, In Places Where Cables Intersect With Other Underground Devices And In Places With Extensive Infrastructure, Control Trenches Should Be Made Along The Route Of The Designed Cab