Tenders Are Invited For Renovation Of A Multi-Family Residential Building With Insulation, Change Of Colors And Change Of Heating Method Located In Strzelce Opolskie At Ul. Krakowska 3.
Tenders Are Invited For Renovation Of A Multi-Family Residential Building With Insulation, Change Of Colors And Change Of Heating Method Located In Strzelce Opolskie At Ul. Krakowska 3.
1. The Subject Of The Order Is The Renovation Of A Multi-Family Residential Building Along With Insulation, Change Of Colors And Change Of Heating Method Located In Strzelce Opolskie At Ul. Krakowska 3.2. The Scope Of The Order Includes In Particular: I. Facades: 1. Removal Of Unused Or Damaged Electrical Cables, Boards, Electrical Connection Stands, Etc. From The Facade.2. Disassembly Of Damaged Sheet Metal Flashings And Damaged Gutters And Settling Tanks Near Downpipes.3. Removal Of Loose Plasters.4. Execution Of Thermal Insulation Of External Walls And Painting Of The Facade: Southern (Front) Facade: Painting With A Colored Thermal Insulation Coating (E.G. At Termo, Declared By The Manufacturer Λ = 0.00032 W/Mk) In The Colors According To The Drawing, While Maintaining The Existing Plaster Textures. The Coating Thickness Was Designed. 2 Mm. Western (Gable) Elevation: Layer Of Mineral Wool, Thickness: 15 Cm (Λ=0.033 W/Mk) In The Etics System. Execution Of Silicone Plasters Using Glue And Mesh, Colored In The Mass In Colors According To The Drawing. Northern (Rear) Elevation: Insulation Made Of Thick Polystyrene. 15 Cm (Λ=0.033 W/Mk) In The Etics System. With Rei60 Fire Protection Strips With A Width Of Min. 200 Cm Thick Mineral Wool 15 Cm, Located In The Corners. Insulate Up To The Height Of The Eaves Cornice. Painting The Eaves Cornice With A Thermal Insulating Coating (E.G. At Termo, Declared By The Manufacturer Λ=0.00032 W/Mk)5. Performing Sheet Metal Flashings On Cornices And Installing Window Sills Made Of Galvanized Sheet Metal. 0.7Mm.6. Relocation Of Gutters And Downpipes (After Reviewing Their Technical Condition). Replenishment And Repair Of Damaged Gutter Elements. 7. Replacement Of Downpipe Settling Tanks.8. Relocation Of The Lightning Protection System (After Inspecting The Technical Condition).9. Replacing External Doors With Wooden Doors (In The Front Elevation) And Aluminum Doors (In The Rear Elevation). Ii. Roof: 1. Installation Of System Snow Fences.2. Construction Of Side Through Ventilation Holes In Chimneys. Insulation Of Chimneys Above The Roof Surface With Mineral Wool. 5 Cm. Plastering Chimneys, Making Chimney Caps. Installation Of New Chimney Sweep Benches And Missing Duct Covers.3. Performing Sheet Metal Flashings Above The Insulation Layer In The Gable Wall Made Of Coated Sheet Metal Or Powder-Coated Steel Sheet In The Color Of The Roof Covering (Ceramic Roof Tiles). 4. Replacement Of Roof Hatches, Chimney Benches And Steps (After Reviewing Their Technical Condition). Iii. Renovation And Assembly Works Inside The Building: 1. Replacement Of Lighting Fixtures In The Basement And Staircase With Fixtures With Motion Sensors. 2. Painting The Basement Walls.3. Installation Of An Information Board In The Staircase.4. Painting The Staircase.5. Replacing Internal Window Sills In The Staircase.6. Installation Of Fire Doors Between The Staircase And The Basement.Iv. Construction Of An Internal Central Heating Installation. 1. Co
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
