Tenders Are Invited For Modernization Of Lighting In School Buildings In The Oborniki Śląskie Commune

The Modernization Will Consist In Replacing The Existing Lighting Fixtures With New, Energy-Saving Led Fixtures. The Led Luminaires Used Must Ensure At Least A 50% Reduction In Installed Power In Relation To The Power Of Existing Luminaires While Maintaining Or Improving Lighting Parameters In Accordance With Applicable Standards. Internal Number. Ceiling Luminaires To Be Dismantled: Approx. 714 Pcs. Outdoor Road Poles Approx. 4 Pcs. Road Exteriors On A Boom Approx. 2 Pcs. Facade Outdoors Approx. 7 Pcs. Number Of Internal Led Lighting Fixtures To Be Installed Should Result From The Lighting Intensity Design. The Ordering Party Reserves The Right To Indicate The Exact Location Of Some Of The Lighting Fixtures During A Site Visit To The Facility. The Scope Includes In Particular: Disassembly Of Existing Lighting Fixtures In The Number Of Approx. 712 Pieces, And Approx. 13 Pieces Outside (Including 4 Road Poles, 2 Road Ones On A Boom On The Facade) And Their Disposal In Accordance With Applicable Regulations. Waste Management Regulations, Disposal Of Dismantled Elements, Delivery, Installation And Commissioning Of A New Led Lighting System, Preparation Of The Surface For The Installation Of New Luminaires, Including Possible Adjustment Of Mounting Points, Preparation Of A Technical Design Including, Among Others, Calculations In A Program (E.G. Dialux, Relux Or Other Equivalent) With An Attached Result File; Delivery And Installation Of New Led Luminaires With Parameters Consistent With The Design, Reconstruction Or Replacement Of Cabling In Accordance With The Design, Installation Of A Capacitive Reactive Power Compensator; Matched To The Installed Power Of Light Sources And At Least 50% Reduction Of The Installed Power Compared To The Existing Condition, Installation Of Luminaires With Motion Sensors In Sanitary Facilities, Communication Corridors And Staircases, Performance Of Electrical And Photometric Measurements After Completion Of Installation, Preparation Of Measurement Protocols For Lighting Intensity And Electrical Safety, Tidying Up The Work Area And Handing Over The Facility For Use. Attachments: - Opz - Inventory Of Luminaires - Auxiliary Material - Minimum Technical And Operational Parameters Of Led Luminaires - Auxiliary Floor Plansadditional Information:1. The Contractor Will Be Obliged To A) Ensure Supervision Of The Electrical Installation, Including Carrying Out Measurements; The Description Presented Above Is For Information Purposes Only. The Exact Scope Of The Subject Of The Order Is Specified In The Bill Of Quantities Attached To The Swz, Which Is An Auxiliary Material For Calculating The Lump-Sum Price Of The Offer. The Ordering Party Will Demand The Use Of Grade I Materials For The Execution Of The Order. The Contractor Will Be Obliged To Provide Documents Regarding The Materials Used To The Ordering Party Before Their Installation. All Works Must Be Performed In Accordance With Applicable Regulations And Standards. During