Throttle Cable Lada Priora. The Gas Cable Is Designed To Transmit Force From The Accelerator Pedal To The Engine Throttle Assembly. The Cable Must Be Made Of Durable Steel Stranded Wire., Antifreeze Red (10 Liters). Antifreeze Is Intended For The Car Engine Cooling System. Type Of Coolant - Carboxylate Antifreeze Class G12 Or Similar. The Color Of The Liquid Is Red. Volume – 10 Liters. The Freezing Temperature Should Not Exceed –40 °C., Engine Compartment Wiring Harness For Lada Priora. The Wiring Harness Is Designed To Connect All The Electrical Components Of The Vehicles Engine Compartment. The Wiring Must Ensure Stable Transmission Of The Electrical Signal Between The Sensors And The Electronic Control Unit., Fuel Pump Assembly For Lada Priora. The Gasoline Pump Is Designed To Supply Fuel From The Fuel Tank To The Engine Power System. The Pump Must Be Electric, Submersible Type. The Pump Must Be Fully Suitable For The Fuel System Of The Lada Priora Car., Throttle Valve Lada Priora. The Throttle Valve Is Designed To Regulate The Amount Of Air Entering The Car Engine. The Damper Must Provide Precise Control Of The Air Supply., Camshaft Position Sensor Lada Priora For Determining The Position Of The Camshaft And Transmitting A Signal To The Electronic Engine Control Unit. Quantity - 1 Pc., Spark Plug 14 Mm For Lada Priora. The Spark Plug Is Designed To Ignite The Fuel-Air Mixture In The Engine Cylinders. The Spark Plug Thread Diameter Should Be 14 Mm. The Length Of The Threaded Part Must Correspond To The Requirements Of The Lada Priora Car Engine., The Ignition Coil Is Designed To Convert Low Voltage From The On-Board Network To High Voltage To Produce A Spark At The Spark Plugs. The Coil Must Be Of A Custom Type For An Injection Engine., Battery 70 Ah / 630 A For Lada Priora. The Battery Is Designed To Start The Engine And Power The Vehicles Electrical Equipment. Battery Type – Lead-Acid Starter., The Crankshaft Sensor Is Designed To Determine The Rotation Speed And Position Of The Engine Crankshaft. Used In The Electronic Engine Control System To Synchronize The Operation Of The Ignition And Fuel Injection Systems.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
