Request For Quotation Products For Energy Service

Dielectric Side Cutters 160Mm - Manual Electrical Installation Tools With Dielectric Handles, Designed For Working With Conductors Under Voltage Of No More Than 1000 V. Length: 160 Mm. Weight - Not Less Than 234 G The Hardness Of The Cutting Edge Of Side Cutters Is 62 Hrc. The Cutting Diameter Of Soft Wire Is At Least 4Mm. The Cutting Diameter Of Hard Wire Is At Least 2Mm., Concrete Drill Set 3 Pcs. Sds-Plus. Length 160Mm Diameter 6,8,10Mm, Metal Cutting Disc 125*2.5*22.2 Mm. Speed ​​- 8500 Rpm, Terminal Block Or Screw Clamp Zvi-15 (4-10 Mm2), Polyethylene, White (Die-12 Terminals), Terminal Block Or Screw Clamp Zvi-5 (1.5-4 Mm2), Polyethylene, White (Die-12 Terminals), Set Of Dielectric Screwdrivers Set Contents: Dielectric Screwdriver, Slotted 2.5X75 - 1 Piece Dielectric Screwdriver, Slotted 4.0X100 - 1 Piece Dielectric Screwdriver, Slotted 5.5X125 - 1 Pc. Dielectric Screwdriver Ph1x80-1Pcs Dielectric Screwdriver Ph2x80-1 Pc. For Work Under Voltage Up To 1000 V Markings On The End Of The Handles Indicating The Type Of Profile Rods Made Of High-Strength Steel S2 Magnetized Tips Packaging: Zippered Case With A Transparent Lid, Aluminum Ladder, Three-Section, Working Height 4.05-7.25 M, Ladder Length 2.95-6.45 M, Maximum Load - 150 Kg, 11 Steps Per Section, Profile Section 71.5X20 Mm, Weight - 18 Kg., Terminal Block Or Screw Clamp Zvi-10 (2.5-6 Mm2), Polyethylene, White (Die-12 Terminals), Terminal Block Or Screw Clamp Zvi-80 (10-25 Mm2), Polyethylene, White (Die-12 Terminals), Terminal Smk 222-422 Feed-Through 2 Poles 0.08-4Mm2 (25 Pcs.), Gas Pipe Wrench No. 2, Wrench Length - 400 Mm, Pipe Grip Diameter - From 20 To 50 Mm, High Voltage Indicator Type Uvnu 10 Sz Ip. Voltage - 10 Kv. Length Of The Insulating Part - 340 Mm. Handle Length - 120 Mm. Total Length Of The Product - 860 Mm. Overall Dimensions 860X80x110mm Sound Signal Volume - 70 Db. Indication Voltage, Kv 1.5 Indication Type - Acoustic And Optical, Gas Pipe Wrench No. 3, Wrench Length - 500 Mm, Pipe Grip Diameter - From 20 To 63 Mm, Terminal Block Or Screw Clamp Zvi-30 (6-16 Mm2), Polyethylene, White (Die-12 Terminals), Sector Shears For Cutting Cables, Type Ns-50Bas, Are Designed For Cutting Multi-Core Copper And Aluminum Armored Cables And Ac Wires With A Maximum Diameter Of Up To 50 Mm; It Is Possible To Cut Low-Carbon Steel Rods With A Diameter Of Up To 16 Mm. Handles - Telescopic, Weight - Not Less Than 2.3 Kg., Set Of Metal Drills 19 Pcs. Diameter 2-10Mm. Steel R6m5. Gost 10902-77, Reel With Sockets For Extension Cord (4 Places Empty 2P+Re 16A/3.5Kw/220V With Thermal Protection Ip20), Gas Pipe Wrench No. 1, Wrench Length - 300 Mm, Pipe Grip Diameter - From 10 To 36 Mm, Transformer Oil T1500 U, The Pipe Thread-Cutting Set Is Designed For Cutting Internal And External Metric Threads, Which Does Not Require Finishing Work On Metal Products And The Restoration Of Damaged Areas. The Standard Size Of Threading Heads Is 1/2, 3/4, 1, 1 1/4. Ratchet For A Screw With A Removable Handle With A Length Of At Least 620 Mm. Plastic Case.