Quotation are invited for Replace 2x 3phase Sump Pumps Delivery Date: 2026/06/30 Delivery To: Water Services Delivery Address: 1 Blue Waters Close, Simons Town Closing Date: 2026/03/19 Closing Time: 04:00 PM Description: 2 each x replace 2x 3phase sump pumps Specification: * Replace 2x 3phase sump pumps Submersible electric pumps 3phase with float switch APPLICATIONS Moving seepage water Agriculture waste water TECHNICAL DETAILS 1.3 kW - 2 kW Completely in AISI 304 stainless steel. 3-phase Equipped with 10 m power supply cable Available with float switch TECHNICAL DATA Maximum immersion: 10 m Maximum temperature of the liquid: 35°C Max. solids size for passage: 10 mm Self-ventilated 2 pole asynchronous motor Class of insulation F IP68 Protection rating 400 ±10%, 50Hz three phase voltage Protection under users responsibility for the three phase version 50mm/2" Discharge connection MATERIALS Pump body, impeller, suction grill, motor cover, seal housing disc and motor case in AISI 304 Shaft in AISI 303 Twin mechanical seal with oil chamber: upper in Carbon/Ceramic/NBR (motor side) lower in SiC/SiC/NBR (pump side) IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: Clause 3: General Obligations 3.6.1.1 For this quotation, purchase orders / works packages will be determined and created as follows: 3.6.1.1.1 Based on the total amount as reflected on the Price Schedule and to the supplier as awarded by the SCM delegated authority. GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. CONTACT ROBERTO SCOTT 073 187 4895 Region 1 South: EAM Blue Waters Close, Simons Town Landline: 021 814 1684 Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/318331
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
