Tenders Are Invited For Expansion Of Municipal Road No. 106636L, Ul. Sasankowa In Abramowice Prywatne

4.1. The Subject Of The Order Is Expansion Of Municipal Road No. 106636L, Ul. Sasankowa In Abramowice Prywatne.4.2. The Ordering Party Divided The Order Into The Following Tasks: 4.2.1. Task No. 1: Construction Of A Sidewalk With Road Lighting On The Municipal Road No. 106636L Ul. Sasankowa In Abramowice Prywatnethe Subject Of The Investment Is The Construction Of A Sidewalk With Road Lighting Along The Municipal Road No. 106636L Ul. Sasankowa In Abramowice Prywatne From The District Road On A Section Of Approximately 723 Meters. The Scope Of Works Includes The Following Works: Construction Of A Sidewalk On The Right Side Of The Road, Construction Of Individual And Public Exits To Adjacent Plots And Construction Of Road Lighting. The Road In Question Is Located Perpendicular To The District Road No. 2273L. The Scope Of The Study Covers A 723 M Long Section From The Intersection With The District Road To The Bend. Along The Entire Length Of The Study, A 723-Meter-Long Sidewalk Made Of Concrete Cubes Was Designed On The Western Side Of The Municipal Road And Within The Intersection With The District Road On Both Sides. Within The Pedestrian Crossings, A Low Curb With A Height Of 0 Cm Was Designed. It Is Planned To Reconstruct The Existing Road Lighting On The Section From The Intersection With The District Road To Gajowa Street By Moving The Existing 5 Lighting Poles With Led Fixtures And Building New Road Lighting From Gajowa Street Until The End Of The Study In Connection With The Existing Condition, In Which 10 New Fixtures Will Be Installed Mounted On 9 Steel Poles. Attention! The Provisions Of The Swz Regarding The Description Of Led Fixtures And Poles Regarding The Requirements Are Binding For The Preparation Of The Tender Offer: 1) The Bid Valuation Should Include The Installation Of An Additional, Reserve, Two-Piece Corrugated Pipe With A Diameter Of 75 Mm Along With A Remote Control Along The Designed Lighting Cable Lines Along The Entire Length Of The Sections. 2) The Contractor Will, Under The Warranty Granted, Perform Servicing (Maintenance) Of The Completed Lighting. Led Fixtures Are To Meet The Following Minimum (Not Inferior) Technical Parameters. Initial Effectiveness Luminaire Min. 135 Im/W, Reactive Power Factor Cos (Fi) >=0.93, Programmable Power Supply With Active Function Of Maintaining Constant Light Flux, Autonomous Power Reduction Function And Dali, Ip66 Quick Connectors For Easy Installation Without Opening The Luminaire, Must Have An Ec Declaration Of Conformity And A Certificate Of An Accredited Research Center Confirming The Declared Compliance, E.G. Enec, Additionally, Lighting Fixtures Should Be Equipped With A Programmable Time Relay (Power Supply) With An Automatic Power Reduction Function In Two Time Intervals In Which The Intensity Of The Luminous Flux Is Reduced At Two Different Levels. The Relay (Power Supply) Should Enable Changing The Settings Both In A Single Luminaire As Well As In All Luminaires Simultaneou