Tenders Are Invited For Thermal Modernization Of Public Buildings In The Koniecpol Commune, Divided Into Three Parts (Tasks)

Task (Part) 1 - Energy Efficiency Of Public Buildings In The Koniecpol Commune - Thermal Modernization Of The Primary School In Łysiny (Koniecpol Commune) Building With A Development Area Of ​​769.80 M2 (Net Area Of ​​The Entire Building 1,426 M2) And Volume Of 6,701.65 M3. Dimensions: 11.06 X 42.36 X 36.05 M (Height X Length X Width). The Scope Of Work To Be Performed Includes: A) Insulation Of External Foundation Walls With 120 Gr Esp Boards. 10 Cm, Including The Implementation Of A Thin-Layer Facade Plaster Made Of A Resin-Mineral Mixture On The Walls Above The Ground (Plinths), Moisture-Proof Insulation And Waterproofing Made Of Kmb Mass, And Laying Dimpled Foil Below The Ground Level; B) Insulation Of External Walls With Eps 70 Gr. Polystyrene Boards. 15 Cm And Eps Boards Thick. 12 Cm Including Thin-Layer Silicone Plaster; C) Insulation Of The Ceiling With Eps100 Thick Mineral Wool Mats. 30 Cm; D) Insulation Of The Basement Floor With Eps 100 Gr. 10 Cm Including Laying The Floor With Tiles; E) Insulating The Chimney Walls With A 3 Cm Layer Of Styrofoam; F) Replacement Of Windows And Doors - White Pvc Windows Equipped With Hygro-Controlled Air Vents; Aluminum Doors With Heat Transfer Coefficient U=1.1 W/(M2k); G) Disassembly Of Existing Flashings, Gutters And Downspouts And Reassembly After Cleaning And Painting, Together With The Installation Of A New Gutter And Downpipe Above The Main Entrance To The Building;H) Disassembly And Reassembly Of Existing Elements On External Walls (Flag Holders, Information Boards, Etc.);I) Demolition And Reconstruction Works, Including: Repair Of External Stairs, Dismantling Of Old Ones And Installation Of New Ones External Window Sills Made Of Coated Sheet Metal And Internal Window Sills Made Of Conglomerate (3 Cm Thick), Making A 40 Cm Wide Band Around The Building Made Of Colored Concrete Cubes, Thick. 6 Cm Framed With A Concrete Edge;J) Works Related To The Internal Central Heating Installation. Along With Accompanying Works And Hot Water Installation, Including: - Replacement Of Existing Capacity Heaters With New Ones; - Replacement Of Central Heating Installations - Pipelines And Radiators Along With Shut-Off, Regulating And Venting Fittings; - Replacement Of The Heat Source - Dismantling Of Existing Central Heating Boilers. Including Equipment (Pipelines, Distributor, Open Vessel) And Delivery And Installation Of A 60 Kw Heat Pump Along With The Necessary Accessories; K) Works Related To The Electrical Installation, Including: - Expansion Of The Main Switchboard With Overcurrent Protection And Installation Of A Monitor For Electricity Production/Consumption On The Th Bus; - Installation Of Rpc And Rpw Switchgears Along With Power Supply For The Switchboards; - Replacement Of The Internal Power Supply Line With A Ykxs Cable 5X16mm2; - Execution Of The Installation For The Heating Water Supply; - Replacement Of Existing Fluorescent And Incandescent Fixtures With Led Fixtures; - Replacement Of The Existing