The Architectural And Complementary Built For School Buildings, Presented In The Contractors Standards - Delivered In Digital Media (Ref A1), Copies Of Projects By Electronic Plotting (A1), Supply And Installation Of Construction Board With Galvani Sheet, Execution Of Office On Construction Site In Plywood Sheet, Furniture And Equipment Not Included. Af_02/2016 (Adapt. Sinapi 93207), Execution Of Canteen On Construction Site Made Of Wooden Sheet, 03/11/2026 - 10:51:19, 03/11/2026 - 10:51:20, 03/11/2026 - 10:51:22, 03/11/2026 - 10:51:23, Execution Of Toilet And Changing Room At Construction Site (Updated From Tsf 100), Temporary Water And Sewage Connection, Work Location - Execution Of Template With Points (Seinfra Base C1630), Execution Of Shed At Construction Site, Mobilization And Demobilization Of Site, Siding With Wooden Plywood. Af_03/2024, Administration According To Agreement No. 2622/2013/Tcu, Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, Mechanically Excavated Pile, Without Stabilizing Fluid, Mobilization/Removal Of Equipment/Moulding Of Loco Piles, Block Frame Using 6.3 Mm Ca-50 Steel - Assembly. Af_01/2024, Block Frame Using 10 Mm Ca-50 Steel - Assembly. A, Block Frame, Insulated Footing, Baldrame Beam And Color Footing, Block Frame Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Machined Concrete 25.0 Mpa With Pumping Cost, Forms Of Wooden Board Footings And Blocks Without Reuse, Insulated Shoe Frame, Baldrame Beam And Ut Running Shoe, Machined Concrete 30.0 Mpa Without Pumping Cost, Mechanical Casting Of Machined Concrete In Structural Parts, Forms Of Wooden Board Straps/Beams/Banner Reapproval. 4X, Pillar Or Beam Frame Of Conventional Concrete Structure, Compens.Resin.14Mm Form For Pillar With Reuse.2 Times, Pillar Or Beam Frame Of Reinforced Concrete Structure Embedded In Sealing Masonry Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Compens.Resin.14Mm Form For Beams With Reuse.2 Times, Slab Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Slab Frame Of Conventional Reinforced Concrete Structure, Slab Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 10, Form Compens.Resin.14Mm Solid Slab Without Reuse, Slab Frame Of Conventional Structure Of Reinforced Concrete Using Steel Ca-60 Of 5, Gravel Coating, Executed Mechanically, Compressed Into Layers, Including Supply Of The Crumb, Being The Layer Measured After Cp Compaction), Black Plastic Tarpaulin For Separating Layer, Commercial Crushed Ballast - Mechanical Spreading, Ribbed Welded Mesh Q196 10X10cm 5, 0Mm 3, 11Kg/M2, Concrete Dosed, Pumped And Cast Fck=25Mpa, Transverse Joint, Including Cutting, Silicone (Pu) Based Sealant, Mechanized Concrete Surface Polishing, Including Concrete Finishing In Laser Leveling (Zero Level), Q92 Ribbed Electrowelded Mesh 15X15cm 4.2Mm(1.48Kg/M2), Ready Mortar Subfloor, Preparation Mechanical With 300 Kg Mixer, Applied In Wet Areas Over Waterproofing, Non-Reinforced Finish, Surface Waterproofing With Acrylic Resin-Based Membrane, 3 Coats. Af_09/2023, Compens.Plastif.17Mm Form Solid Slab Without Reuse, Floor Painting With Acrylic Paint, Manual Application, 3 Coats, Inc
