Bids Are Invited For Price Registration For The Acquisition Of Chair Kits And School Desks, As Well As Sets Of Tables And Chairs, According To Specifications And Quantitatives To Be Defined, Intended For Units Of The Municipal Education Network, In Accordance With The Minimum, Quantitative Specifications And Other Conditions Contained In This Term.
Bids Are Invited For Price Registration For The Acquisition Of Chair Kits And School Desks, As Well As Sets Of Tables And Chairs, According To Specifications And Quantitatives To Be Defined, Intended For Units Of The Municipal Education Network, In Accordance With The Minimum, Quantitative Specifications And Other Conditions Contained In This Term.
Individual School Set, Consisting Of 01 (One) Table And 01 (One) Chair, Model Cja-06. Specification: Individual School Set, Model Cja-06: Set For Student Size 6, With The Students Height Being Between 1.59 And 1.88 M, In Accordance With The Standard Established By The Fnde, Duly Certified By Inmetro, In Compliance With Ordinance No. 401, Of December 28, 2020, Which Approves The Conformity Assessment Requirements For School Furniture Chairs And Tables For Individual Student Set. The Furniture Must Comply With The Following Technical Standards: Abnt Nbr Iso 9001:2015 Quality Management Systems Requirements; Abnt Nbr Iso 14020:2002 Environmental Labels And Declarations Type I Environmental Labeling. Abnt Nbr 14006 School Furniture Chairs And Tables For Individual Student Sets; Abnt Nbr Iso 14001:2015 Environmental Management Systems Requirements With Guidelines For Use; Abnt Nbr Iso 14024:2022 Environmental Product Declarations And Programs General Principles And Requirements; Technical Specifications School Table Individual Table Consisting Of A Polypropylene Top, With A Nominal Thickness Of 18 Mm, Coated On The Upper Side With High Pressure Melamine Laminate (0.8 Mm), Textured Finish, In Gray Color, With Rounded Corners And Transverse Reinforcement. Lower Face With 0.6 Mm Phenolic Counterplate. Final Dimensions: 600 Mm (Width) 450 Mm (Depth) 19.4 Mm (Thickness) Allowing Variation Of Up To +2 Mm In Linear Dimensions And 1 Mm In Thickness. Edges With Extruded Thermoplastic Tape (Pvc, Pp Or Pe), Nominal Width Of 22 Mm And Thickness Of 3 Mm (0.5 Mm), Bonding Using Hot Melt Adhesive, Minimum Tear Off Resistance Of 70 N. The Tape Joint Must Not Present Gaps Or Misalignments. Metal Table Structure Composed Of Cold Rolled Carbon Steel Tubes, With Longitudinal Welding, According To Specifications: Uprights And Longitudinal Cross: Oblong Section 29 Mm X 58 Mm, Plate 16 (1.5 Mm);, School Set Model Cja01b (Fde/Fnde). Specification: School Set Model Cja01b (Fde/Fnde) Intended For Students With A Height Between 0.93 M And 1.16 M (Size 1), Composed Of 01 (One) Table And 04 (Four) Chairs, With Compulsory Certification Issued By Inmetro, In Compliance With Ordinance No. 401, Which Establishes Conformity Assessment Requirements For School Furniture Chairs And Tables For Individual Student Set. Products Must Fully Comply With The Following Technical Standards: Abnt Nbr Iso 9001:2015 Quality Management System Requirements; Abnt Nbr Iso 14001:2015 Environmental Management System Requirements And Guidelines; Abnt Nbr Iso 14024:2022 Environmental Product Programs And Declarations General Principles And Criteria; Abnt Nbr Iso 14020:2002 Labeling And Environmental Declarations Type I. Abnt Nbr 14006 School Furniture Chairs And Tables For Individual Student Sets; Technical Specifications School Table School Table With Top Made Of Abs (Acrylonitrile Butadiene Styrene), Without Added Mineral Fillers, Injection Molded, Containing Co-Injected Flanged Nuts With M6 Metric Thread. High-Pressure Melamine Laminate, Nominal Thickness Of 0.8 Mm, Must Be Applied To The Upper Face, Fixed With High-Resistance Two-Component Adhesive. Final Dimensions: 800 Mm (Width); 800 Mm (Depth); 26 Mm (Height). Variation Of 3 Mm For Width And Depth And 1 Mm For Height Is Allowed. The Top Mold Must Present Permanent Engraving Containing:
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
