Proprioception Elastic Bed Elastic Bed With Tubular Structure Made Of Steel, Guaranteeing Adequate Mechanical Resistance And Durability. It Must Support A Minimum Load Capacity Of 150 Kg And Have 06 (Six) Welded Feet, Providing Greater Stability And Safety During Use. The Equipment Must Have At Least 32 (Thirty-Two) Springs, Fixed By 16 (Sixteen) Galvanized Hooks, Ensuring Uniform, Efficient And Safe Rocking Movement. The Upper Part Must Be Made Of High-Resistance Material, With Reinforced Stitching Using Nylon Threads, Suitable For Continuous Use. The Feet Must Have Rubberized Tips With A Suction Cup System, Guaranteeing Adhesion To The Ground, Anti-Slip Effect And Stability During Use. The Equipment Must Meet The Minimum Standards Of Quality, Safety And Durability Required For Its Purpose. It Must Have Pre-Cut Foam With A Minimum Thickness Of 5 (Five) Centimeters And A Minimum Density Of D33, Providing Comfort And Adequate Support To The User. The Covering Must Be Made Of Synthetic Leather In Black, Resistant, Waterproof And Easy To Clean. The Equipment Must Have Approximate Dimensions Of 10 X 130 X 52 Cm (Length X Width X Height). The Stretcher Must Support A Minimum Weight Of 140 Kg, Meeting The Minimum Standards Of Quality, Safety And Durability Required For Its Purpose., Corner Ladder For Physiotherapy Corner Ladder For Physiotherapy, Made Of Mdf, Intended For Professional Use In Functional Rehabilitation. It Must Have 02 (Two) Adjustable Handrails And 03 (Three) Steps, These Being Covered With Anti-Slip Sandpaper Strips, Providing Safety During Ascent And Descent. The Sides Must Be Covered With An Anti-Slip Layer Made Of Raven-Like Material, In Black, Guaranteeing Greater Stability To The Equipment. The Equipment Must Allow Adjustment Of The Height Of The Handrails, Allowing Adjustment For Ascent And Descent, So That The Professional Can Adapt The Height Of The Handrail According To The Patients Height. It Should Allow Assembly In /L/ Or Straight Format, With Adaptation For Use On The Right, Left Or In A Longitudinal Position. It Should Also Allow Adjustment Of The Bars At 02 (Two) Levels, Enabling Use By Children. The Equipment Must Support A Minimum Weight Of 140 Kg. The Height Of The Handrails Must Be A Minimum Of 90 Cm And A Maximum Of 139 Cm, Two-Step Stainless Steel Ladder Ladder With Two Steps, Made Of Stainless Steel, Guaranteeing Mechanical Resistance, Durability And Protection Against Corrosion. The Steps Must Have An Anti-Slip Coating Or Treatment, And The Structure Must Have Rubberized Protections On The Parts In Contact With The Floor, In Order To Prevent Slipping During Use. The Equipment Must Have An Adequate Finish, With Rounded Corners And A Stable Base, Meeting The Minimum Quality And Safety Standards Required., Horizontal Magnetic Exercise Bike Cardiac And Calorie Calculation. It Should Have An Lcd Display, With Cardiac Monitoring Via A Hand Grip System. The E
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
