Bids Are Invited For Acquisition Of Personal Protective Equipment (Ppe) For Pinhais City Hall

Shell Type Noise Damper, Short Boot (Samu Style) - In Chrome Tanned Cowhide Leather In Black, Gunpowder Print, Water-Repellent With A Minimum Thickness Of 1.8 Mm. Round Nozzle. Side Zipper On The Inside, With Internal Insulation Lining On The Extension Of The Zipper. Upper In Vacum Napa Leather For Waterproof Clothing. Shin Guard With Internal Reinforcement In Reconstituted Leather. Cleaning Insole Made Of E.V.A. Minimum 3-Month Warranty For Manufacturing Defects. Numbering: 33 To 44. Details Of The Parts: Upper: High Quality Cowhide, Chrome-Tanned Cowhide, Minimum Thickness Of 1.8 Mm With Water-Repellent Semi-Chrome Finish. Upper: With Rubber Protector, Superimposed In High Relief (3D), To Prevent Wear And Tear On The Leather. Lining In Vacum Napa Leather For Clothing. Upper Rear Part: Padded With Yatex Foam 10 To 15 Mm, In Sections, Lining On The Outside In Vacum Nappa Leather And On The Inside With The Same Lining As The Back Of The Shaft. Front Part: At The Height Of The Instep Padded In Buds, P.U Foam. 10 Mm Thick, Covered In Vacum Garment Type Nappa. Sole: Made From Genuine Rubber, Glued And Lacquered On The Side, Resistant To High Temperatures (300º C). Non-Slip, With Water Drain Channels. Resistant To Wear And Bending. 100% Nylon Zipper: High Resistance, On The Inner Side Of The Docano, Covered By An External Flap In Semi-Chrome Leather That Covers The Entire Length Of The Zipper, Approximately 40 Mm Wide, With A V-Cut Detail When Opened, Black Velcro Tape Type Contact Closure. Reflective Fabric: At High Frequency, In The Region Close To The Heel. On The Upper Side Of The Boot, It Must Contain Logos To Be Defined., Protective Pants Against Injuries Caused By Canine Attacks. General Purpose Trouser-Type Safety Clothing With 360º Protection Of The Lower Limbs Through Internal Fabric With Dog Bite Mitigating Properties. Internal Fabric Properties: 3X1 Twill Frame Or Similar, 70 Cm High Between The Hem And The Knee. Reinforcement In 100% Polyester, Resistant And Sewn In 360 Degrees From The Hem Of The Pants. Outer Fabric In 100% Cotton Denim. The Bar Must Have An Overlock Finish. It Must Have 5 Belt Loops, 2 Front Pockets, 1 Back Pocket And 2 Side Pockets. Metal Zipper And Button Closure, Both Of Excellent Resistance. Meet The Requirements Of Current Regulations. Color And Size To Be Defined., Mens And Womens Industrial Pants, Made Of Heavy Denim With A Composition Of 97% Cotton And 3% Elastane, Color To Be Defined By The Requesting Secretary, With Double And Reinforced Stitching, With 100% Polyamide Thread, 1/2 Waist, Half Waistband, With Elastic On The Back, With 5 Belt Loops, 02 Side Pockets At The Height Hip, 2 Knee-Length Side Pockets With Lapel And 4-Hole Button Closure, 2 Hip-Height Back Pockets With Lapel And Button Closure, Silk Screen Printing On The Right Front Pocket Measuring 65 X 95 Mm, Fly With Reinforced Zipper Closure With Thick Aluminum Teeth And Two Horizontal Strips Reflective Strips Approximately 04 Cm Wide, At Shin Height. Size From 36 To 62., Type A Safety Footwear (Sneakers) With Lace-Up Closure, Made Of Leather And Microfiber, With Composite Toe Cap, Padded Upper And Bidensity Polyurethane Sole Injected Directly Into The Upper. Pu Bidensity Sole, Non-Slip, With Abs