Bids Are Invited For Price Registration For Future And Eventual Acquisition Of School Sets And Furniture, With The Aim Of Meeting The Needs Of The Municipal Department Of Education And The Municipal Department Of Citizenship Of The Municipality Of Luís Eduardo Magalhães/Ba.

Dimensional Student Set 06 Cja06b (Blue): Height 1.59M To 1.88M, Composed Of: Two Independent Elements (01) Table And (01) Chair. Table Made Of Thermoplastic Resin, Manufactured Using Thermoplastic Injection Process; Abs Top With Rectangular Shape Measuring At Least 740 Mm X 600 Mm X 450 Mm Below The Top, For Better Ventilation, It Must Contain A Minimum Of 34 And A Maximum Of 38 Holes. Structure: Made Of Industrial Steel In Square Tubes Formed By A Mechanical Forming Process By Bending, Measuring, Base Of The Top By Two Tubes Measuring Approximately 20Mm Contain The Brand On The Backrest In High Relief. Table Base Formed By Two Tubes Measuring Approximately 28Mm X 58Mm With A Minimum Thickness Of 1.2 Mm, Interconnected By A 20Mm X 30Mm Metalon Tube. Non-Slip Shoes Partially Surrounding The End Of The Tubes That Make Up The Feet, Formed By 30Mm X 50Mm Metalon Tubes, Performing The Paint Protection Function, Increasing Durability, Made Of Virgin Polypropylene, In The Same Color As The Top And Attached To The Structure. Chair With Seat And Back In Virgin Plastic Resin, Manufactured Using The Thermoplastic Injection Process. Flat Seat Measuring Approximately 380Mm X 410Mm X 400Mm (Hxwxd), Minimum Thickness 5Mm. Backrest With Anatomical Curvature Measuring Approximately 410Mm X 245Mm, Minimum Thickness 5Mm, Must Contain The Brand On The Backrest In High Relief. Seat Base And Connection To The Back Formed By Tubes Measuring Approximately 25Mm X 25Mm With Ergonomic Curvature For Accommodation. Foot Interconnection Base., Dimensional Youth Student Set 04 Cja04b (Red): Height 1.33 M To 1.59 M, Manufactured Using Thermoplastic Injection Process; Rectangular Shaped Abs Top Measuring At Least 608Mm (Width) X 466Mm (Depth) Measuring At Minimum 490Mm X 350Mm X 280Mm, At The Bottom Of The Top. Structure Made Of Industrial Steel In Square Tubes Formed By Mechanical Forming Process By Bending Measuring 2Mm Thick. Table Base Formed By Two Tubes Measuring Approximately 28Mm Table Made Of Thermoplastic Resin, Manufactured Using Thermoplastic Injection Process; Abs Top With Rectangular Shape Measuring At Minimum 600Mm X 600Mm X 450Mm Structure Made Of Industrial Steel In Square Tubes Formed By Mechanical Forming Process By Bending Measuring, Student Set Dimensional 07 Cja07b (Brown): Student Height: From 1.74M To 2.07M Top In Abs (Acrylonitrile Butadiene Styrene), Virgin, Free Of Mineral Fillers, Injected In Brown Color (See References), Equipped With Coin-Injected Flanged Or Recessed Nuts, With M6 Metric Thread, And Structural Cross Member In Nylon “6.0” (Polyami