Bids Are Invited For Acquisition Of Plank Body For Installation On Truck Chassis (Mercedes Benz Atego 3330K 46 8X4)

Plank Bodyworkplank Bodywork For Transporting Machines, Measuring 3200 Mm Wide And 8000 Mm Long. Capacity Of 25 Tons, Structure With 8” Laminated U Profile Chassis, Crossbars Arranged Transversely On The 4” U Profile Chassis, With L-Shaped French Arms Under The Crossmembers In 3.75 Plate Thickness And U Profile As Required. Front Portico With A Height Of 1500 Mm From The Plank Floor. Metal Floor Made Of 3.75 Mm Thick Sheet Metal And With “Rails” Made Of 40Mm Wooden Planks On The Sides. Side Of The Board With Semi-Stiffened U Profile In 3/16” Sheet Metal With A Height Of 197Mm For Interconnection Of The Ends Of The Sleepers. Rear Part Of Board Inclined At 12.5º With A Horizontal Length Of 1200Mm. Front Side Ladder. Machines With Hydraulic Lifting System Through Piston. Two Retractable Ramps With 2400 Mm In Length And 1000 Mm In Width For Each Ramp, Assembled With 3 Model “I” Beams Welded For Each Ramp, 2” Individual Grease Fitting And Hydraulic Drive System With 1 Piston For Each Ramp, Ramp Lengthening Support, Hoses, Oil Reservoir, Control. Installation Of Electrical System For Side And Rear Signals. Cargo Tie Down Supports On The Sides And Front Of The Floor. All Bodywork Welding Will Be Done Using The Mig Process. The Fixing On The Truck Chassis Is Made By 18Mm Spring Clamps. Application Of An Anti-Corrosive Base And Painting With Pu Nacor Paint (To Be Defined), Reflective Strips And Lighting According To Contran, Fenders, Side Protectors, Mobile Rear Bumper, Metal Tool Box, Water Barrel And With All The Regularization Installation Services Required By Contran And Dnit, About The Truck (Truck Model)