Tenders Are Invited For Reconstruction Of District Road No. 3308D In Korytów Over A Length Of 0.99 Km

1. Name Of The Task Given By The Ordering Party: Reconstruction Of District Road No. 3308D In Korytów Over A Length Of 0.99 Km2. The Subject Of This Public Procurement Is: Construction Works3. The Scope Of The Order Includes: 1) Cutting And Supplementing The Roadsides With Crushed Aggregate Or Milled Aggregate, Both Sides Of The Roadsides - Average Thickness 15 Cm, 75 Cm Wide, Together With Supplementation, Planting And Appropriate Compaction; 2) Cold Milling Of Asphalt Surfaces - Road, Average Thickness 5 Cm, With The Removal Of The Excavated Material Up To A Distance Of 1 Km, Together With A Fee For Storage Or Disposal Of The Surplus Spoil. With The Average Road Width Of The Section 5.3 M, Over A Length Of 1162 M;3) Excavation And Construction Of A Deep Bed. 20 Cm For The Designed Slopes; 4) Construction Of The Substructure From Crushed Aggregate, Upper Layer Thick. 20 Cm On Exits5) Construction Of The Through Part Of The Culvert Under The Exits From Reinforced Concrete Or Pvc Pipes Ø 50 Cm Along With Dismantling The Existing Culvert And Performing Earthworks;6) Construction Of End Walls From Crushed Stone On Cement Mortar;7) Mechanical Cleaning And Sprinkling Of Structural Layers With Asphalt Emulsion;8) Asphalt Concrete Surface - Binding Layer - Concrete Asphalt Ac 16, 6 Cm Thick - Road + Exits;9) Asphalt Concrete Surface. Wearing Course, Ac 11 S Asphalt Concrete, 4 Cm Thick;10) Cleaning The Ditch From Silt With A Silt Thickness Of Up To 20 Cm;11) Clearing Bushes And Undergrowth With Removal Of The Remains;4. A Detailed Description Of The Subject Of The Order Is Specified In: 1) Auxiliary Cost Estimate - Appendices No. 11 To Swz2) Drawing Documentation - Appendix No. 12 To Swz5. Detailed Technical Conditions For The Execution Of Works Are Specified In: Detailed Technical Specification (Sst) - Annex No. 13 To Swz.6. Whenever References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law, The Contractor Should Assume That Such A Reference Is Accompanied By The Words Or Equivalent. If References To Standards, European Technical Assessments, Technical Specifications And Technical Reference Systems Are Used In The Design Documentation, The Ordering Party Allows Solutions Equivalent To Those Described. When Analyzing The Design Documentation, The Contractor Should Assume That Each Reference Used In The Design Documentation Is Accompanied By The Word Or Equivalent. If Trademarks Are Used In The Design Documentation Or Technical Specification For The Execution And Acceptance Of Works, It Means That They Are Provided As Examples And Define Only The Minimum Expected Quality Parameters And The Required Standard. The Contractor May Use Equivalent Materials Or Devices, But With Similar Or Better Technical And Quality Parameters, The Use Of Which Will In No Way Adversely Affect The Proper Functioning Of The Solutions Adop