Tenders Are Invited For Reconstruction And Change Of Use Of The Former Pharmacy Building In Sośnica Into Two Social Premises.

A) Demolition Works. - Demolition Of Partition Walls And Construction Of Door And Window Openings In Accordance With The Graphic Part Of The Project. - Disassembly Of Internal And External Doors (The Task Will Include Installing New Door Joinery). - Dismantling Of Internal Walls To The Extent Indicated In The Graphic Part Of The Project. - Removing Wall Tiles In Bathrooms. - Removing Floor Tiles In Bathrooms. - Removing And Dismantling Internal Water And Sewage Installations. And Central Heating To The Extent Consistent With The Technical Design. - Cutting Out And Dismantling The Internal Electrical Installation To The Extent Consistent With The Technical Design. Note: Demolition Works Should Be Carried Out Manually And With The Use Of Power Tools. It Is Prohibited To Use Pneumatic And Demolition Machines For Demolition. The Debris Resulting From The Demolition Should Be Taken Away From The Construction Site And Disposed Of. B) Reconstruction Construction Works. - Construction Of New Window And Door Openings In The Existing Walls In Accordance With The Graphic Part Of The Project. (Before Drilling The Holes, Make New System Lintels From L-Type Reinforced Concrete Profiles. Ensure That The Minimum Width Of The Beams Support On The Wall Is 12 Cm).- Reconstruction And Expansion Of The Internal Electrical And Water And Sewage Installations In Accordance With The Industry Design. (Connections Between Walls And The Backfill And In Places Exposed To Water Seepage, Also At The Junction With Grids And Linear Renewals, Should Be Sealed With A Sealing Tape With Cuffs Rolled Up Onto The Wall To A Height Of At Least 10 Cm. Carefully Apply Liquid Foil To The Entire Area, Following The Manufacturers Recommendations. The Thickness Of The Foil Layer Cannot Be Less Than 0.1 Cm. In Shower Cabins, Slope The Floor In The Direction Of The Designed Linear Drain Of Approximately 2%. Prime The Substrate). - The Floors In The Living Rooms Remain Unchanged. It Is Necessary To Replace The Floors In Bathrooms As Above. And In A Room With A Cement Floor. In Rooms Where No New Floors Are Planned And Partition Walls Have Been Demolished, Only Tiles Should Be Added In The Places Left By The Demolished Walls. New Floors Should Be Made Of Stoneware Tiles, Easily Washable, Non-Absorbent, Anti-Slip Class Min. R10, Resistant To Disinfectants, Dimensions 30 X 30 Cm, Grade I, Unglazed. Make A Plinth Of 10 Cm High Tiles Along The Walls In The Bathrooms. C) Door Joinery - Internal Joinery As Full Boards Or With Partial Glazing, Bathroom Doors And Wet Rooms With Undercuts Or With Air Intake Holes With A Total Area Of ​​Not Less Than 220 Cm2. External Steel Door Joinery With Small Glazing. Equipped With Two Locks And A Handle. U-Value≤1.30 W/M2c.D) Window Joinery. - Existing Windows Unchanged. - Windows Designed From White Pvc Profiles With Insulated Glass. U-Value ≤0.90 W/M2c. Windows Should Be Equipped With Internal Pvc Window Sills And Flashings Made Of Coated Steel Sheets In The Façade