Vibrating Smooth Gasoline Asphalt Compactor Roller, With The Following Minimum Specifications: 500 Kg; Motor With Power Of 13 Hprolo Vibrating Flat Gasoline Asphalt Compactor, With The Following Minimum Specifications: 500 Kg; Engine With Power Of 13 Hp, Vibration Frequency Of 70 Hz, Roll With Dimensions Of 450 Mm In Diameter By 600 Mm In Width, Force/Torque Of 25 Kn, Overall Dimensions Of 1,980 12 Hp Excavator; Open Cabin, With The Following Minimum Specifications: Equipment Equipped With Koop 192 Or Higher, Diesel Engine, With Power Of 7.6 Kw, Approximate Weight Of 650 Kg, Main Gear Pump And Rotation Speed Of 3,000 Rpm, Powered By 12V/60A Battery. It Has Overall Dimensions Of 1,660 Mm In Length, 800 Mm In Width And 1,970 Mm In Height, Track Measuring 1,250 X 180 X 200 Mm, Minimum Ground Clearance Of 360 Mm, Travel Speed Of Up To 2 Km/H And Rear Turning Radius Of 1,000 Mm. As For The Scope Of Work, It Features A Maximum Digging Height Of 2,800 Mm, Maximum Dumping Height Of 1,860 Mm, Maximum Digging Depth Of 1,250 Mm, Maximum Blade Lifting Height Of 180 Mm And Maximum Blade Cutting Depth Of 210 Mm., Forklift Diesel; With The Following Minimum Specifications: Nominal Capacity Of 3,600 Kg Diesel Forklift; With The Following Minimum Specifications: Nominal Capacity Of 3,600 Kg, Load Center Of 500 Mm, Duplex Tower, Lifting Height Of 3,500 Mm, Lowered Tower Height Of 2,270 Mm And Cabin Height Of 2,190 Mm, Measuring 2,860 Mm In Length (Without Forks) And 1,225 Mm Wide, Equipped With 1,220 Mm Forks, 2,510 Mm Turning Radius And Minimum Ground Height Of 150 Mm. It Has A Hydraulic Brake, Pneumatic Tires, Double Wheels, Operating Weight Of 4,480 Kg, Fuel Tank (Diesel) With A Capacity Of 50 Liters, Automatic Transmission And 12V/80A Battery., Flatbed Trailer For Transporting A Mini Roller Compactor With The Following Minimum Specifications: 1.40 Wide Length; Load Capacity: 2500 Kg Trailer Board For Transporting Mini Compactor Roller With The Following Minimum Specifications: 1.40 In Length; Load Capacity: 2500 Kg; Tires: New 175/70/13; Rim: 13; Painting: Electrostatic Epoxy; Chassis: Steel On Beam G 100 13 With Reinforcement; Floor: In Steel Plate 3/16 Checkered; Roller Support Base: Steel In 1’’ Inch Round Tube; Sides: In Steel In 1’’ Inch Round Tube; Fenders: Steel On Plate 18; Rear Ramp: Retractable Steel On Plate 3/16 Checkered With Locks On Plate 14; Wheelset: 1.5 Inch Solid Iron Axle End, Multi-Hole Hub Complete With Goal Bearing And Chrome Wheel Bolts; 2 Axles: Made In 2.1/4 Double Angle Iron; Front Hitch: Height Adjustable To 2500 Kg With Anti-Theft System; Suspension: Spring Closure 5 Blades And Shock Absorbers And 7/16X2.5 Screws With Locking Nut; Lashing Hooks: 3/8 Round Iron Steel; Spare Wheel Holder: In Steel In 1 Inch 14 Round Tube With Flat Bar 1.1/4 X ¼; Plate Protector: Steel On Plate 14Electrical System: 6X1 Wiring And Male Socket; Lighting: Led Taillights (Brake Light/Half Light/Turn Signal) And License Plate Light Documentation Released For Registration., 03/09/2026 - 09:13:33
