Bids Are Invited For Construction Of Cmei Maria Antônia De Souza Bravim In The Canaã Neighborhood.

Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure, Siding With Metal Tiles, Electrical, Aerial, Three-Phase Power Input, Temporary Water And Sewage Connection, Conventional Location Of The Work, Using A Template Of Planks Running With Points Every 2.00M For 2 Uses., 03/09/2026 - 14:29:54, 09/03/2026 - 14:58:42, Rental Of Container 2, 30 Vegetation, Vegetation And Small Trees, Mechanized Trench Embankment With Hydraulic Excavator Bucket Capacity: 0.8 M Power: 111 Hp, Width Up To 2.5 M, Depth Of 1.5 To 3.0 M, With Sandy Clay Soil., Manual Excavation For Crowning Block Or Footing Including Excavation For Placing Formwork, Preparation Of Trench Bottom With A Width Greater Or Equal To 1.5 M And Less Than 2.5 M Adjustment Of The Natural Soil., Mechanized Trench Backfilling With Backhoe Loader Retro Bucket Capacity: 0.26 Mpower: 88 Hp, Width 0.8 To 1, Depth 1, With Soil, Manual Excavation For Crowning Block Or Footing Including Excavation For Placing Formwork., 5 M Adjustment Of Natural Soil, Manual Excavation For Crowning Block Or Footing, Mechanized Backfilling Of Trench With Backhoe Loader, Mechanically Excavated Pile, Without Stabilizing Fluid, 25Cm In Diameter, 40Cm In Diameter, 60Cm In Diameter, Slim Concrete Ballast, Applied In Blocks Of Crowning Or Footings, Thickness Of 5 Cm Reinforced Concrete For Blocks, Manufacture, Assembly And Dismantling Of Formwork For Crowning Block, In Sawn Wood, E=25Mm, 4 Uses., Insulated Footing Frame, Baldrame Beam And Running Footing Using 10 Mm Ca50 Steel Assembly, Frame Of Various Reinforced Concrete Structures, Except Beams, Pillars, Slabs And Foundations, Using 5.0 Mm Ca60 Steel Assembly., Footing Concreting, Fck 30 Mpa, Using Launching, Densifying And Finishing Pump, 5 Cm Thickness, Applied To Crowning Blocks Or Footings., E=25 Mm, Baldrame Beam And Running Footing Using 8 Ca50 Steel Mm, Baldrame Beam And Running Footing Using 10 Mm Ca50 Steel, Block Frame, Insulated Footing, Baldrame Beam And Running Shoe Using 12.5 Mm Ca50 Steel, Block Frame Using 5 Mm Ca60 Steel Assembly, Concreting Of Crowning Block Or Baldrame Beam, With 25Cm, Mechanical Pile Drilling Of Reinforced Concrete, Diameters Up To 40 Cm, In Resin Plywood Sheet, E=17 Mm, Block Frame Using 10 Mm Ca50 Steel, Block Frame And Shoe Using 25 Mm Ca50 Steel, With Use Of Pump, E=17 Mm., Water Lowering Frame Using 5 Mm Ca60 Steel, Assembly And Dismantling Of Formwork For Baldrame Beam, Baldrame Beam And Running Shoe Using 8 Mm Ca50 Steel, Fck 30 Mpa., Assembly And Dismantling Of Formwork For Rectangular Pillars And Similar Structures, Single Height, In Plasticized Plywood Sheet, Pillar Frame Or Beam Of Conventional Reinforced Concrete Structure Using Ca50 Steel 10.0 Mm, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12 Ca50 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca60 5 Steel, Pillar Concreting, Fck = 25 Mpa, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca50 Steel Of 8.0.0 Mm., Concreting Beams And Slabs, Fck=