Traditional Flare Model Womens Pants, Size 36, Made In Bi-Elastic Fabric With Spandex, Composed Of Polyester, Elastane And Synthetic Polymer, With Two-Way Elasticity, Dark Gray Color, Waistband With Belt Loops, Front Zipper And Button Closure, Reinforced Finishing, Resistant Seams, Fabric With Appropriate Weight For Professional Use, Resistant To Deformation And Fading., Womens Cigarette Model Pants, Fitted To The Body, Length To Ankle, Structured Waistband With Belt Loops, Reinforced Finishing And Resistant Seams., In Size 38, Size 38, In Size 40, 09/03/2026 - 15:00:42, In Size 42, In Size 44, In Size 46, In Size 48, In Size 50, In Size 52, Reinforced Finishing And Resistant Seams, Elegance Model Womens Blouse – Petal Type Short Sleeve, In Size S, In Black, Must Be Made Of Bologna Type Crepe Fabric Or Equivalent Of Equal Or Higher Quality, With A Minimum Weight Of 140 G/M², Composed Of Polyester Or Polyester With Elastane, Presenting Good Drape, Lightness, Adequate Opacity And Resistance To Fading. The Sleeve Should Be Of The Petal Type, With A Delicate And Structured Finish. The Piece May Or May Not Have A Detail On The Collar With A Bow Or Drawstring For Front Fastening, Integrated Into The Model Itself, Without Compromising Institutional Standardization. It Must Feature Reinforced Seams, Internal Overlock Finishing And Application Of Institutional Embroidery In Accordance With The Standard Defined By The Administration, Elegance Model Womens Blouse – Long Sleeve, With A Minimum Weight Of 150 G/M², Adequate Opacity, Resistance To Fading And Dimensional Stability After Washing. The Sleeve Should Be Long, Traditional Model, Finished With A Simple Hem Or Discreet Cuff, Suitable For Professional Use. The Piece May Have, Integrated Into The Model, In Size M, In Size M, An Internal Overlock Finish And Institutional Embroidery Application In Accordance With The Standard Defined By The Administration., In Size L, In Size G1, A Classic Or Elongated Womens Blazer, In Dark Gray, Must Be Made Of Bi-Elastic Fabric With Spandex, With Bidirectional Elasticity That Guarantees Comfort, Mobility And Good Recovery Elastic. The Fabric Must Have A Minimum Weight Of 260 G/M², Resistance To Deformation, Fading And Pilling. The Model Will Feature Long Sleeves With Simple Cuffs, Structured Shoulders, Traditional “V” Lapel With Flap, Front Closure With One Or Two Buttons, And Front Pockets With Decorative Lapel. The Blazer Will Be Fully Lined, With Reinforced Seams, Internal Overlock Finishing And Back Yoke For A Better Fit To The Female Silhouette. The Piece Will Have An Elongated Length, Ending Close To The Hip Region, As Per The Pattern Indicated In The Image Shown In This Terms Of Reference, Providing An Elegant Fit In Line With Corporate Use. The Modeling Must Be Adjusted To The Body, Maintaining Comfort And Freedom Of Movement For Prolonged Use. It Must Contain Institutional Embroidery Applied To The Front, In Accordance With The Pattern And Positioning Defined By The Administration, Without Compromising The Aesthetics And Functionality Of The Piece., Without Compromising The Aesthetics And Functionality Of The Piece, In Size Xl, Unisex Polo Collar T-Shirt, Made In Piquet Knit With A Polyester And Cotton Composition, Must Be In White, With A Straight Collar And Cuffs, Finish Reinforced And Front Closure With Three
