Industrial Machinery – Procurement Of An Underfloor Lathe For Vbbr. A New Urd Is To Be Built For The Vbbr At The Upstallstrasse Depot Location In Brandenburg An Der Havel. This New Machine Is Intended To Replace An Existing Machine In An Existing Pit, And The On-Site Conversion Work Is To Be Reduced To The Bare Minimum. This Publication Relates To The Production, Delivery, Assembly, Commissioning, Training, Trial Operation And Final Acceptance Of A Cnc Single-Urd Including All Necessary Peripherals For The Upstallstrasse Depot. Only Wheel Sets Of Vbbr Trams (E.G. Kt4d, Ktnf6, Mgt6d, 48T Plus Special Vehicles) With A Meter Gauge Of 1,000Mm Can Be Measured And Processed On The Machine. The Single Underfloor Wheel Set Lathe Must Be Suitable For The Following Tasks/Functions: - Automatic Measurement Of The Wheel Sets In At Least The Usual Wheel Set Dimensions D, E, D, H, Qoutside, Qgutter, H, G, L, R And S - Measurement/Processing Of The Wheel Sets In The Installed State Or As An Individual Wheel Set With Bearings/Bearing Housings - Automatic Reprofiling Of The Wheel Rims/Wheel Tread On Monoblock And Tire Wheel Discs Vbbr Profiles In Various Diameters And Widths As Well As: Removal Of Over-Rolling On The Profile Chamfer And In The Area Of The Wheel Flange Tip - Proof Of The Compliant Condition Of The Wheelsets After Processing With Regard To The Parameters D, E, D, H, Qoutside, Qrinners, H, G, L, R And S With A Measuring System In Accordance With Din 27201-9 - Automated Transfer Option Of Measurement And Identification Data Of The Wheelset As An .Xml File As Well As The Automated Storage Of Pdf/A Processing Protocols On The Vbbr Systems - Possibility Of Remote Maintenance Access Via The Manufacturers Own Technology - Output Of Defined Machine Information Via The Opc Ua Interface - Registration/Logout Of Operators Via Dongle And Assignment Of Appropriate Authorizations The Urd Is Equipped With An Automatic Chip Disposal Device With A Chip Crusher, A Smoke And Dust Extraction System, A Hydraulic System And Other Functionally Necessary Peripherals According To Ce Conformity Using The Latest State-Of-The-Art Technology. The Primary Measuring Circle Diameter Range To Be Processed Is Between 350 Mm And 776 Mm. The Inner Wheel Back Spacing Is A Maximum Of 955 Mm, The Maximum Wheel Rim Width Is 105 Mm. The Axle Load Acting On The Machine Is A Maximum Of 105 Kn (Plus Any Hold-Down Forces That May Need To Be Applied). Applicants Will Find The Exact Description Of The Service, Including Minimum Requirements, In The Tender Documents, In Particular In The Published Specifications, Which Show The Current Processing Status. The Client Expressly Reserves The Right To Further Adapt And Specify The Procurement Documents In The Course Of The Procurement Process Or To Change (Minimum) Requirements Within The Limits Of Procurement Law.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
