Tenders Are Invited For Construction Of The Wierzyce - Imielno Bicycle Path In The Design And Build Formula

The Subject Of The Project Is The Design And Construction Of The Wierzyce - Imielno Bicycle Path. The Path Runs Along The Municipal Road. It Starts At The Service Road Of The S5 Expressway And Continues West Towards The Towns Of Imielno And Wierzyce, Where It Ends At The Intersection. − Length Of The Bicycle Path Approx. 970 M, − Width Of The Bicycle Path – Approx. 2.0 M, − Surface Of The Bicycle Path – Bituminous Ac8s, − Expected Traffic - Kr 1, − Drainage – Into The Roadside And Green Areas. In Open Road Ditches, In Tight Wells Connected With A Drainage Pipe. Bicycle Path: - Wearing Course Made Of Ac8s Asphalt Concrete, 5 Cm Thick, - Sprinkling With Asphalt Emulsion In The Amount Of 0.7 Kg/M², - Substructure Made Of An Unbound Mixture (Mechanically Stabilized Crushed Aggregate* With Continuous Grain Size 0/31.5 Mm) With A Thickness Of 20 Cm, - Sand Bedding 10 Cm, - Substrate According To Pn-S-02205. Requirements For Crushed Stone Kłsm Fraction 0/31.5 Mm For The Foundation: − Water Absorption Wa24-2 − Frost Resistance F-4 − Resistance To Crushing La ≥ 30 − Homogeneous Aggregate, Without Impurities And Admixtures Meeting The Requirements Of Grading Curves For Aggregate For Mechanical Stabilization. As Part Of The Construction Of The Bicycle Path, Pedestrian Crossings With Crossings For Cyclists Should Be Provided. Crossings With Crossings Should Be Marked With Thick-Layer Horizontal P-10/P-11 Markings (With A Red Crossing) And Active D-6B Vertical Markings With Reflective Foil. Crossings Should Be Marked With Reflective Point Elements In A Cast Iron Cover, Equipped With Led Lights And A Photovoltaic Panel, Plow-Resistant, Long-Lasting With A Replaceable Reflective Element. One-Sided Reflector. There Should Be 10 Reflective Points Per Crossing. Requirements For Peo: - Reflector: Prp1>250Mcd/Lux, - Working Time Min. 600 H, - Diameter Approx. 180 Mm, - Polycrystalline Photovoltaic (Pv) Panel, - White Color. The Pedestrian Crossing And The Cyclist Crossing Should Be Illuminated And Marked With Active Signs To Make Them Better Perceived By Drivers. Lamp Requirements: - Led Lamps, Light Source: Focusing Lens Luminaire, Light Color Cold White (6000K), Led Luminaire Power 54W, 5400 Lumens, Waterproof Ip67, - Powered From The Mains, - B-120 Foundation, - D-6 Signs With A Panel With Pulsators Operating Only When The Detector Detects Approaching Pedestrian Movement. Bituminous Descents: - Wearing Course Of Ac8s Asphalt Concrete With A Thickness Of 5 Cm, - Sprinkling With Asphalt Emulsion In The Amount Of 0.7 Kg/M², - Unbound Mixture Base (Crushed Aggregate* Mechanically Stabilized With Continuous Grain Size 0/31.5 Mm) With A Thickness Of 20 Cm, - Reinforcement Of The Substrate With C3/4 Cement-Stabilized Aggregate, 15 Cm Thick, - Substrate According To Pn-S-02205. The Materials Used Will Have Certificates And Technical Approvals And Approvals For Use In Construction In Poland, While Observing The Rules Regarding The Control Of Strength Parameters, They Must