3-Seater Stringer Specification: 03-Seater Stringer Seat/Back In Polypropylene 3-Seater Stringer Set, Consisting Of Injected Feet In Copolymer Polypropylene, Two Rectangular Steel Tube Crossbars 20X40x1.2Mm Thick, Seat And Backrest Support Sets In Tube And More 02 (Two) Sets Of Seat And Back Injected In Polypropylene Copolymer. The Dimensions Occupied Are: 840Mm Height, 518Mm Total Width, Its Length Varies According To The Number Of Seats. It Has A Space Between Seats Of 101Mm. The Seat Is Made Of Injected Copolymer Polypropylene With Curvature Slightly Adapted To The Body And Textured Finish, With Dimensions Of 465Mm Wide, 415Mm Deep, 5Mm Thick And Rounded Corners, Joined To The Structure By Means Of 4 (Four) Nuts (American Bushing (¼” 330Mm High With A Thickness Of 5Mm And Rounded Corners, Joined To The Structure By Means Of A Double-Cavity Fitting In The Lower Part Of The Backrest That Joins The Metal Structure, Locked By Two Retractable Pins (Pineirinhos) Injected In Polypropylene Copolymer In The Color Of The Backrest And Without The Presence Of Rivets Or Screws, Allowing Better Fixation And Practicality.Feet In Polypropylene Reinforced By Steel Tube, Made Of Injected And Molded Copolymer Polypropylene With A Textured Finish, Are Divided Into Two Parts, Upper And Lower, And Joined Together By Means Of Fittings In Two Ø38.1X0.9Mm Steel Tubes, Forming A Highly Resistant Set, The Plastic Feet Are Fixed To Two Crossbars Of 20X40mm Tube With A Thickness Of 1.2Mm Using Screws And Nuts, So That The Result Meets The Requirements Set Out In Abnt Standards. With A Minimum 5-Year Warranty., 4-Seater Stringer - 4-Seater Stringer Seat/Back In Polypropylene, Large Trash Bin Specification: Plastic, With Articulation Of The Reinforced Lid – Metal Rod, With Pedal, 100 Liter Capacity, Type I Steel Bookcase - Simple Library Bookcase Without Base With 06 Shelves, Type Ii Steel Bookcase - Double Library Bookcase Without Base With 12 Shelves Specification: Double Library Steel Bookcase Without Base - Model: Ebdmsb 2000 Features: Mountable Steel Bookcase With 12 Shelves In Steel Sheet #22 (0.90Mm) Measuring 2000Mm(H)X1020mm(W)X555mm(D), With 1 Reinforcement In “X” On The Inside Of The Shelf In Sheet Metal #18(1.20Mm) Shelf: All In Sheet Metal #22(0.90Mm) With Triple Folds On The Sides (2 Folds Perpendiculars Being The 1St 30Mm With 90º, The 2Nd Being 10Mm With 90º, The 3Rd Being 950Mm With 90º, The 4Th Being 30Mm With 90º And Ending With 10Mm) And Doubles In The Front And Back Parts (4 Perpendicular Folds With The 1St Fold Being 30Mm With 90º, The 3Rd At 30Mm With 90ºm A And Ends With 10Mm At 90º. It Has Holders On The Sides In Plate #16 (1, 50Mm) Which Has Clamps At The Ends For Fixing To The Columns: 02 Columns Made Of Steel Sheet # 18 (1, 20Mm) Being. (2000Mm) In Height With An L-Shaped Fold Of (30Mmx80mm) With 31 Height Adjustments Of (5Mm) Difference Between One Hole And Another, Rectangular Hole Enabling More Effective Adjustment And Locking Of The Shelves On The Side. It Has A Cushion As A Finish To The Column.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
