Arab World1,Middle East,Middle East and North Africa, MENA
12-03-2026
Work Detail
Quotation are invited for Solar Fans a. 12 INCH FAN Size: 12 inch The motor capacity 12 Watt at least The fan must be designed for solar energy and could also be charged through the main power electricity 220 V and frequency 50 HZ. Minimum Three (3) speed oscillating fan AC/DC function: Manual Switching button, or Automatic Switching function between DC and AC Controller and battery located inside solar fans body Adjustable Multi-angle movement, Vertical and Horizontal. For Horizontal movement, 90 degrees movement angle at least. For Vertical movement, up and down movement angle, and a switching screw should be provided for the Vertical movement. Rechargeable Battery Capacity: at least 54 WH for any type of Batteries sealed lead-acid (AGM, Gel, or all Lithium types are accepted) Base lamp should contain white LEDs Fan motor: should be made of brass and power-saving. The Solar fans Battery capacity, controller/charger capacity and fan motor power should be compatible together to optimum performance, Operating Time: (4 to 6) hours on high speeds after full charge Charging Cable for charging from electricity main power: the length of the charging cable to be 100 cm at least. CONTROLLER (Charger- regulator): The controller should be installed inside the solar fans body The controller (charger-regulator) should be grouped to secure excellent heat exchanging The controller should be with high-performance battery overcharge, over discharge, overload, and short circuit protection The battery must be fully charged within (4 to 6) hours max of solar brightness by maximum b. SOLAR PANEL: Cell: Poly or Mono Crystalline Silicon solar cells. Aluminum Frame Power 18 to 50 watts Cable 2x2.5 sqmm Cu/ rainy or NYY (3 meters at least). Tender Link : http://www.iraq-businessnews.com/tenders/
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.