Magnetic Unijet Type Hydrometer; With Metal Alloy Housing, With Painting Of The Housing Preferably In Black Color, Permanent Flow Q3 = 1.6 M³/H, Minimum Range Of 80; ¾” Diameter; 115 Mm Long Body; Accuracy Class 2 Or Higher; With Reverse Flow Measurement (Subtracting From The Indicated Totalized Volume); For Horizontal Installation; Maximum Working Temperature 50°; Pressure Loss Class Δp 63 Or Lower (Lesser Pressure Loss); With Polycarbonate Or Glass Dome, Watchmaking Transparent, Rotating, With Ip68 Protection, Inclined At 45° And Pre-Equipped With Pulse Emitter For Reed-Switch Or Inductive Type Sensors; Inmetro Or Self-Verification Seal Issued By Inmetro, Without Connections, Bsp Thread, Anti-Fraud, Minimum Working Pressure 10 Bar, Iso 9001:2015 Certification, Magnetic Shielding, Filter With Stainless Material Integrated Into The Hydrometer Inlet The Serial Numbers Of The Hydrometers Must Be Engraved On The Hydrometers And With A Label. Adhesive On The Cover Of The Hydrometers, Different From Each Other And Sequential., Minimum Range Of 80”; 115 Mm Long Body; Accuracy Class 2 Or Higher; With Reverse Flow Measurement (Subtracting From The Totalized Volume Indicated); For Horizontal Installation; Maximum Working Temperature 50°; Pressure Loss Class Δp 63 Or Lower (Lesser Pressure Loss); With Polycarbonate Or Glass Dome, Tilted At 45° And Pre-Equipped With Pulse Emitter For Reed-Switch Or Inductive Type Sensors; According To Nbr 8194/2019, Ultrasonic Hydrometer, Dn 25 Mm, Q3 = 6.3 M³/H, R=500, Polymeric Housing - Ultrasonic Type Hydrometer Without Moving Parts; With Composite Housing (Engineering Polymer); Q3 = 6, R = 500; Diameter 25 Mm; Body 260Mm Long Or Less; Accuracy Class 2; Temperature Class T30; Load Loss Class Ip63; Sensitivity Class U0/D0; For Horizontal/Vertical Installation; With Polycarbonate Or Glass Dome, Dry Clockwork (Ip68), Lcd Display And Pre-Equipped With Pulsed Output For Telemetry/Datalogger; Battery Powered With 10 Years Of Useful Life (Minimum); According To Nbr 8194/2019, Nbr 15538/2023 And Inmetro Ordinance 155/2022. Have Sealing And Certification By Inmetro Or Self-Verification Seal Issued By Inmetro, Without Connections. The Serial Numbers Of The Water Meters Must Be Engraved On The Water Meters And With An Adhesive Label On The Cover Of The Water Meters, 03/06/2026 - 08:30:09
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
