Bids Are Invited For Hiring A Specialized Company To Carry Out The São Miguel Aqueduct Restoration Project, Located At Rodovia Governador Mário Covas, 64-100, Bairro Guaporanga, Biguaçu/Sc, Including Supply Of Materials And Labor, In Accordance With The Executive Project, Iphan Guidelines And Applicable Technical Standards, Meeting The Conditions, Quantities, Requirements And Estimates Established In The Terms Of Reference And Its Annexes.

1 Preliminary Services 1.1 Supply And Installation Of Workplate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, 1.2 Siding With Metal Tile. Af_03/2024, 1.3 Rental Of Container 2, 30 With 1 Toilet, Paraoffice, Complete, Without Internal Partitions (Not Including Mobilization/Demobilization), 2 Demolitions, Removals And Cleaning - 2.1Manual Cleaning Of Vegetation On Land With A Hoe. Af_03/2024, 03/04/2026 - 18:11:03, 03/04/2026 - 18:11:33, 03/04/2026 - 18:12:02, 03/04/2026 - 18:12:32, 03/04/2026 - 18:13:02, 2.2 Demolition Of Reinforced Concrete Pillars And Beams, Manually, Without Reuse. Af_09/2023, 2.3 Demolition Of Mortars, 2.4 Removal Of Metallic And Ceramic Fiber Cement Tiles, 2.5 Removal Of Doors, 2.6 Removal Of Windows, 2.7 Cleaning / Washing Of Walls With Manual Brushing And Neutral Detergent (Substrate Cleaning, Including Removal Of Vegetation), 2.8 Cleaning/Washing Walls With Manual Brushing And Neutral Detergent (Manual Washing With Non-Pressurized Water And Neutral Detergent), 2.9 Demolition Of Complete Construction, 2.10 Removal Of Metal Or Wooden Post Height Up To 7 Meters, 2.11 Removing Benches, 2.12 Loading, Unloading And Transport Of Demolition With A 6-Meter Dump M³, 3 Structural - 3.1 Section 04-A - 3.1.1 Infrastructure3.1.1.1 Block Frame Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, 3.1.1.2 Block Frame, Baldrame Beam Or Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2017, 3.1.1.3 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, 3.1.1.4 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, 3.1.1.5 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 10, 3.1.1.6 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-50 Steel Of 10, 3.1.1.7 Slab Frame Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 6, 3.1.1.8 Framing Of Miscellaneous Reinforced Concrete Structures, Except Beams, Pillars, Slabs And Foundations, Using 12.5 Mm Ca-50 Steel -Assembly. Af_06/2022, 3.1.1.9 Common Solid Ceramic Brick Of *5 X 10 X 20* Cm (W X H Af_10/2022, 3.1.1.11 Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, Simple Straight Leg, Made Of Resin Plywood Sheet, 4 Uses. Af_09/2020, 3.1.1.12 Assembly And Disassembly Of Solid Slab Formwork, Made Of Resined Plywood Sheet And Wooden Cementing, 4 Uses. Af_03/2022, 3.1.1.13 Application Of Structural Adhesive Based On Epoxy Resin, Two-Component, Pasty (Thixotropic), 3.1.1.14 Pumpable Machined Concrete, Resistance Class C30, Includes Pumping, Launching, Densification And Finishing Service, 3.2 Section 04-B - 3.2.1 Frame For Execution Of Radier, Concrete Floor Or Slab On Ground, Using Q-138 Screen. Af_09/2021, 3.2.2 Concrete Subfloor Cast In Situ, Machined, Fck = 30 Mpa, Conventional Finish, Thickness 15 Cm, Reinforced With Q-138 Mesh, 3.2.3 Frame Of Various Reinforced Concrete Structures, 3.2.4 Application Of Structural Adhesive To The Base