Bids Are Invited For Rp For Acquisition Of Electrod Furniture And Other Items For New Gcm Bases

Medium Back Swivel Chair With Arms - Black 13962:2018., Adult Refectory Set. Color To Be Defined By The Adult Dining Room Set. Color To Be Defined By The Sector - 01 (One) Refectory Table Unit: Height 755 X Depth 700 Upper Face Made Of High-Pressure Formica, Highly Resistant To Cleaning, With A Minimum Thickness Of 0.7 Mm. 5 Millimeters, 01 Horizontal Sleepers In Steel Tube 50 X 20 Millimeters, 2 Millimeters And 02 Beds In U-Shaped Steel Plate Measuring 76 02 Structural Sleepers In Rectangular Steel Tube 50 X 30 Millimeters, 2 Millimeters. The Structural Beams Must Have At Each End 03 M6 Or M8 Threaded Rivet Bushings For Fixing To The Side Feet. - 02 Bench Units In Dimensions: Height 460 X Depth 350 X Width 1350 Millimeters. 1/2, 2 Millimeters, 01 Steel Tube Crosspiece 1020 50 X50 Milimetros, 65 Milimetros Em Aco 1020.- Ponteiras/ Sapatas Em Polipropileno Copolimerovirgem, Isento De Cargas Minerais, Fixadas A Estrutura Atraves De Encaixe Medindo 37, 5 X 48 Milimetros.- Garantia Minima: 12 Meses.- Cor: A Ser Definida Pelo Setor Solicitante., Mesa Reuniao Oval - Medidas Approximate: 745Mm Height, 2700Mm Width And 1100Mm Depth;- Top Made Of Continuous Mdp Sheet In Gray Color With 25Mm Thickness And Covered In Low Pressure Textured Melamine Film On Both Sides, Equipped With Injected Plastic Cable Gland With Removable Cover.- Front Panel Double Made Of Continuous Demdp Sheet 18Mm Thick And Covered In Low Pressure Textured Melamine Film On Two Sides. - Maple Tape For Coating And Finishing The Flat Edges Of The Sheet, Made Of Pvc Tape In The Color And Pattern Of The Coating, With Impact Resistance And Thermally Stable. Fixed To The Substrate Using The Gluing Process With Hotmelt Adhesive. With A Thickness Of 2.5 Mm For The Top And 1Mm For The Other Parts. - Base Made Up Of Shaped Metal Sheets, Whose Composition Is Divided Into A Lower Base, A Vertical Mount, And An Upper Base. Lower Base Made Of Galvanized Steel Sheet With A Thickness Of 2.00 Mm, Stamped And Drawn, Measuring 25X 680 Rivet Nut Being Accepted. Single Column, Made From Thick Steel Plate