Tenders Are Invited For Reconstruction Of Municipal Road No. 140419C Rzeszyn - Rzeszynek

The Main Task Of The Reconstruction Of Municipal Road No. 140419C Is The Construction Of A 6.0 M Wide Bitumen Road On The Section Of Axis No. 1 With Road Section 1/2 (Single-Lane, Two-Way Road With Two Lanes) And 3.5 M Wide On The Section Of Axis No. 2 With Cross-Section 1/1 (Single-Road, Two-Way Section With One Lane In Both Directions). Ultimately, A 6.0 M Wide Road Will Be Framed With A Curb On The Right Side Along With The Existing Sidewalk And Exits, And On The Left Side With A New Curb (The Existing Curb Is Due For Demolition) And Exits To Adjacent Properties And Dirt Roadsides. The Curb Protrudes 12 Cm Above The Designed Road And A Maximum Of 4 Cm On Exits. The Planned Exits On The Left Side Of The Road Are Framed From The Side Of The Road And The Property With A Sunken Road Retainer. The Surface Of The Exits Is Made Of Concrete Cubes. From Km 0+200.50, An Internal Road (Reacher) Without A Crossing Begins. At The End Of The Reach, Within The Road, There Is A Square Up To 8.7 M Wide. In This Section, A 2% Roof Slope Was Used, And In The Final Square, A One-Sided Slope To The Right To The Existing Street Inlet. The Roadway Of Axis No. 2 Starts From The Edge Of The Road, Axis No. 1 (Km 0+200.50 Of Axis No. 1, Left Side). The Connection Of The Road Edges Is Rounded With Radii Of 6 And 12 M. On The Section From Km 0+000 To Km 0+008.30, The Road Width Is 5.0 M, Then On The Section Up To Km 0+017.30, It Narrows To A Width Of 3.5 M. It Continues Along The Existing Gravel Surface And The Existing Road. On An Arc With Apex Wl And A Radius Of 60 M, It Widens To 5 M. It Widens And Narrows On A Section Of 10 M From Km 0+156.29 To Km 0+166.29 And From Km 0+224.18 To Km 0+234.18. On The Remaining Section Of The Municipal Road, Axis No. 2, The Road Width Is 3.5 M. The Connection Between The Edges Of The Municipal Road No. 140419C And The Municipal Road No. 140401C Is Rounded With Radii Of 5 And 9 M. On The Entire Section Of The Road, Axis No. 0.25 Cm, Ground Shoulders Covered With Grass. A Detailed Description And Scope Of Execution Of The Subject Of The Order Is Included In The Design Documentation, Technical Specifications For The Execution And Acceptance Of Construction Works (Hereinafter Referred To As Stwiorb) And The Bill Of Quantities, Which Constitute Annexes To This Swz. Design Documentation Is Available On The Website Of The Proceedings At: Https://Jezioragree.Ezaniąjacy.Pl The Attached Bill Of Quantities Serves As An Aid To Contractors In Estimating The Investment Costs.