Tenders Are Invited For Construction Of An Access Road To Pszok And The Sewage Treatment Plant In Kucerz, Commune. Lubanie From Km 0+000 To Km 0+465

It Includes The Reconstruction Of The Access Road In The Town Of Kucerz On The Section From Km 0+000 To Km 0+465 Located In The Lubanie Commune, Including The Municipal Road No. 190 151C Mikorzyn - Włoszyca Lubańska, Which Is The Right Side Of The Bituminous Surface And Through Its Section It Connects To The District Road No. 2609C Nieszawa - Gąbinek - Włocławek. The Road Provides Access To Plants Located Along The Designed Road. It Is A Section Of A Road Running Along The Existing Trace Of A Gravel Road, In A Separate Road Lane. It Is A Section Of A Blind Road, I.E. Without A Crossing And Unmarked. Design Assumptions When Designing The Road, Parameters And Criteria Were Used: Road - Class D - Road Width 500 Cm - Shoulder On Both Sides 75 Cm - Reinforced With Crushed Stone - Width Of The Road Crown - 650 Cm - Bituminous Exits For The Entire Section, A Structure For The Parameters Was Adopted For The Parameters - Surface Structure With A Permissible Load Of A Single Vehicle Axle Of 100 Kn/Axis (Kr2) - For A Design Speed Of 30 Km/H - Road Slope - Roof Slope 2% - Roadside Slope - 4% (Hardened) The Scope Of Work And The Contractors Responsibility Within The Scope Of This Order Also Includes: 1. Ensuring Appropriate Traffic Organization During Construction Works, Including Providing Appropriate Marking, If Required, 2. Before The Commencement Of The Works, Preparation Of A Safety And Health Protection Plan For The Construction Works To Be Carried Out, If Required, 3. Organization And Development Of The Construction Facilities, 4. After The Works Are Completed, Returning The Construction Site To Its Original Condition, Dismantling Temporary Structures And Tidying Up The Area, 5. Preparation Of As-Built Geodetic Documentation.6. During The Execution Of The Order, Provide Users With Access To Adjacent Properties And To Pszok. A Detailed Description Of The Subject Of The Order Includes: Design Documentation, Technical Specification For The Execution And Acceptance Of Works, And Bill Of Quantities Available On The Website Of The Proceedings. In Each Case, Standards, Technical Assessments, Technical Specifications And Technical Reference Systems Referred To In Art. 101 Section 1 Point 2 And Section 3 Of The Public Procurement Law, The Contractor Should Assume That Such A Reference Is Accompanied By The Words Or Equivalent. If References To Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems Are Used In The Description Of The Subject Of The Order, The Ordering Party Allows Solutions Equivalent To Those Described. When Analyzing The Design Documentation, The Contractor Should Assume That Each Reference Used In The Design Documentation Is Accompanied By The Word Or Equivalent. If The Technical Documentation Or Other Document Relating To The Description Of The Subject Of The Contract Indicates In Any Way The Manufacturer Of The Device, Material, Etc., Through Parameters, Trademarks, Patents, Origin, Sou