Tenders Are Invited For Architectural, Construction, Engineering And Inspection Services – General Planning Services For The New Construction Of The Social Building And The Vehicle Hall At The Municipal Building Yard

Architectural, Construction, Engineering And Inspection Services – General Planning Services For The New Construction Of The Social Building And The Vehicle Hall At The Municipal Building Yard. The Planned Construction Project Is Divided Into 4 Construction Phases, Which Are To Be Implemented One After The Other. The First Step Is To Build A New Social Wing Including Development On The Farm Property. After Completion, The Vehicle Hall With The Adjacent Social Wing Including Roofs And Shelters Will Be Demolished. This Will Be Followed By The Construction Of The New Approximately 1,000 M² Vehicle Hall As A Warm Hall System Construction. The Fourth Measure Planned Is To Adapt The Outdoor Facilities Including Washing Areas. A) New Construction Of A Social Wing A New Social Wing Is To Be Built On The Construction Site As A Solid Structure Including A Foundation. The Choice Of Location On The Site Must Be Planned According To The Existing Conditions. The Old Vehicle Hall With Social Wing Will Not Be Demolished Until The New Building Is Completed. This Means That No Interim Building Is Necessary. The Building Needs To Be Reconnected. Drinking Water & Elt Can Be Newly Buried. A Heat Pump Is Being Considered As The Heating Medium. A Photovoltaic System Will Also Be Installed On The Roof. The Social Wing Is To Be Planned For Around 20 Employees, Of Which 25% Are Women And 75% Are Men. Changing Rooms, Sanitary Areas, Drying Rooms, Break Room, Tea Kitchen And 2 Offices Must Be Integrated Into The Building. B) Demolition Of The Old Vehicle Hall With Adjacent Social Wing The Demolition Of The Old Vehicle Hall (Approx. 19.50M X 13.00M) Including The Crane System And The Single-Storey Social Wing (Approx. 3.00M X 13.00M) As Well As The Attached Roofs/Shelters Should Be Carried Out On The Basis Of The Wood Protection And Static Brief Assessment Of The Existing Structure. There Is Also A Car Lift In The Hall, Which Must Be Dismantled For Reassembly. There Are Also 2 Assembly And Maintenance Pits Installed In The Vehicle Hall, One Of Which Is Closed With Metal Plates. Please Note That The Hall Is Directly Adjacent To A Neighboring Hall Including A Fire Protection Wall. C) New Construction Of A Vehicle Hall As A Warm Hall - System Construction Approx. 1,000 M² In The Area Of ​​The Demolished Vehicle Hall, A New Warm Hall Of Approx. 1,000 M² In Size Is To Be Built As A System Construction Including Floor Slab, Reinforcement And Sealing. The Roof And Walls Receive Thermal Insulation. The Existing Vehicle Lifting Platform, A New Crane System And An Assembly And Maintenance Group Also Need To Be Integrated Into The Building. The Access To The Hall Via Gates Must Be Planned As Well As The Technically Necessary Building Equipment In The Areas Of Heating/Ventilation/Sanitary And Electrical Installations. Function Of The Vehicle Hall: + Storage Space For Various Large Vehicles From The Farm + Workshop With Extraction System + Storage Area + E-Charging Station + Machine Storage D) Adaptation Of Outdoor Facilities Including Washing Area Following The Aforementioned Construction Work, The Outdoor Facilities In The Construction Area (Building Reference) Must Be Adapted. Replacement Plantings, Green And Paved Areas, Drainage And Lighting Must Be Included In The Planning. The Existing Washing Area In Front Of The Vehicle Hall Is Also New Again