Request For Quotation 03. Rotary Hammer. Electric Drill. Angle Grinder. Cordless Drill-Screwdriver. (Z. 195)

03. Cordless Drill/Driver. Functional, Technical, Quality, Performance Characteristics: Designed For Work On Driving And Unscrewing Screws And Self-Tapping Screws. Battery Type. Motor Type Is Brushless. Battery Type Li-Ion. Chuck Type: Quick-Release Chuck. Maximum Torque, Nm Not Less Than 45 And Not More Than 46. Battery Voltage, V Not Less Than 18 And Not More Than 19. Battery Capacity, A*H Not Less Than 1.5 And Not More Than 1.6. Presence Of Reverse. Availability Of Backlight. Engine Brake. Size Of Clamped Equipment, Mm Not Less Than 0.8 And Not More Than 10. Hard Torque, Nm Not Less Than 45 And Not More Than 46. Soft Torque, Nm Not Less Than 19.5 And Not More Than 20. Number Of Speeds 2. Maximum Number Of Revolutions, Rpm Not Less Than 1350 And Not More Than 1400. Minimum Number Of Revolutions, Rpm Not Less 400 And No More. The Number Of Torque Stages Is 18+1. Battery Slider Device. Number Of Batteries Included: 2. Maximum Drilling Diameter (Metal), Mm, Not Less Than 13. Maximum Drilling Diameter (Wood), Mm, Not Less Than 38. Chuck Mount 3/8. Warranty Card. Gost 30873.7-2006 Certificate, 03. Electric Drill. Functional, Technical, Operational, Quality Characteristics: Rated Power Of At Least 810 W. Current Strength At Voltage 230 V, 3.8 A. Idle Speed (Gear I/Ii) 0-1200 / 0-2800 Rpm. Speed ​​Controller. Number Of Beats (Gear I/Ii) 0-19200 / 0-44800 Beats/Min. Chuck Type: Toothed. The Clamping Range Of The Drill Chuck Is 1.5-13 Mm. The Maximum Drilling Diameter In Wood Is 40/30 Mm. The Maximum Drilling Diameter In Steel Is 13/13 Mm. The Maximum Drilling Diameter In Concrete Is 16/16 Mm. Drill Chuck Thread 1/2″X20 Unf. Gost Iec 60745-2-1-2011. Certificate, 03. Angle Grinder. Functional, Technical, Operational, Quality Characteristics: Rated Power Of At Least 2200 W. Current Strength At Voltage 230 V 10 A. Idle Speed 6000 Rpm. Spindle Thread M14. The Maximum Diameter Of The Cutting Disc Is 230 Mm. The Maximum Diameter Of The Grinding Disc Is 230 Mm. The Maximum Diameter Of The Rubber Disk Is 230 Mm. The Maximum Diameter Of The Wire Wheel Brush Is 100 Mm. The Maximum Diameter Of The Cup-Shaped Wire Brush Is 100 Mm. St Rk Іэс 60745-2-3-2019. Certificate, 03. Teskish. Functional, Technical, Quality, Performance Characteristics: Designed For Making Holes In Hard Materials: Stone, Brick, Concrete. Vertical Engine Arrangement. Mains Voltage, V 220. Maximum Power, W, No Less Than 1500 And No More Than 1550. Maximum Number Of Revolutions, Rpm No Less Than 880 And No More Than 890. Maximum Impact Frequency, Beats/Min No Less Than 4350 And No More Than 4400. Shank Type Sds-Plus. Maximum Diameter Of Drilling With A Drill (Wood), Mm Not Less Than 40 And Not More Than 41. Maximum Diameter Of Drilling With A Drill (Metal), Mm Not Less Than 13 And Not More Than 14. Maximum Diameter Of Drilling With A Drill (Concrete), Mm Not Less Than 32 And Not More Than 33. Maximum Impact Force, J, Not Less Than 6 And Not More Than 6.1. Number Of Modes 3 (Drilling With And Without Impact, Chiselling). Vibration Protection. Speed ​​Adjustment. Safety Coupling. Cable Length, At Least, M 2. Equipment: Hammer Drill, Additional Handle, Drills 8,10, 12 Mm. Peak Chisel, Spatula Chisel, Dust Collector, Depth Limiter. In A Plastic Case. Gost Iec 62841-2-6-2020 Warranty Card. Certificate