Complete Digital Radiography System, Composed Of A Flat Panel Digital X-Ray Detector (Flat Panel Detector – Dr) And A Digital Dry Thermal Printer For Medical Images, Obligatorily Including: Supply Of New, Unused Equipment; Complete Physical Installation; Technical And Software Configuration; Integration With Existing Systems (Ris, Pacs, Modalities); Clinical Application And Protocol Adjustment; Acceptance Tests; Operational And Technical Training; Warranty, Technical Support And Authorized Assistance In The National Territory. The System Should Be Intended For Use In A Hospital Or Outpatient Environment, Carrying Out General Radiography Exams, With The Possibility Of Integration To Multiple Imaging Modalities. 2. Digital X-Ray Detector – Flat Panel (Dr) Portable Digital X-Ray Detector, Flat Panel Type (Fpd – Flat Panel Detector), With Direct Digital Radiography Technology (Dr), Designed For The Acquisition Of Radiographic Images With High Diagnostic Quality, Low Dose To The Patient And High Mechanical Robustness. The Detector Must Be Wireless, Allowing Greater Operational Flexibility, Use In Fixed And Mobile Equipment, And Adaptation To Different Clinical Environments. 2.2 Detection Technology And Image Quality The Detector Must Have, At A Minimum, The Following Technical Characteristics: Image Sensor Based On Tft (Thin Film Transistor) In Amorphous Silicon (A-Si); Cesium Iodide (Csi) X-Ray Scintillator, Structured In Columns, Guaranteeing: Better Quantum Efficiency; Greater Image Sharpness; Reduction Of Radiation Dose To The Patient; Maximum Pixel Size 140 Micrometers (Μm); Minimum Field Of View 36 X 43 Cm (14 X 17 Inches); Minimum Active Area Compatible With Full Body Scans; Minimum Active Matrix 2560 X 3072 Pixels; Minimum Grayscale Depth 16 Bits; Minimum Spatial Resolution Of 3.5 Line Pairs Per Millimeter (Lp/Mm). 2.3 Acquisition, Processing And Performance. Maximum Image Acquisition Time After Exposure, Rest Armchair. Reclining In Up To 4 Positions, Structure In Carbon Steel Tube Measuring 1 X 1.20Mm And 7/8 X 1.20Mm, Backrest. Seat And Rest. Feet, Upholstered And Covered In Corano, Differentiated Finish In High-Resistance Stitching, D23r Foam And 7 Cm Thick, Simultaneous Movements Of The Backrest And Footrest Controlled By Means Of A Side Lever, Feet With Plastic Tips, Treatment, Anti-Rust, Painting, Electrostatic Powder, Laying Size: 1, 62 X 0.75 X 0.55 (L X W Xh), Sitting: 0.95 X 0.75 Kg, Approximate Capacity: Up To 150Kg, Electric Table For Gynecological Examination, Tubular Chassis Structure, Made Of Carbon Steel Coated With Aisi 304 Stainless Steel (Chrome-Nickel). Pantograph Lifting System With Armored Motors, Resistant To Contamination By Liquids, Dust And Other Waste. Rectangular Base With Aisi 304 Stainless Steel Coating (Chrome-Nickel). Foam Upholstery And Graphite-Colored Coverings, With An Anatomical And Removable Headrest. Movements: Ascent, Descent, Back, Motorized Full Leg, Zero Key With Electrical Activation Via Wired Remote Control. Locking Of The Wheels On The Maximum Caster Itself. Load Capacity: 250Kg. Dimensions: Max Height 900Mm, Min Height 515Mm, Back 78
