Bids Are Invited For Acquisition Of Medical And Hospital Equipment.

Lot 1 - Wireless Led Light Curing Device With Radiometer: Possess A Power Of Up To 2500 Mw/Cm². Have At Least Two Power Modes For The Dentist To Use At Low Or High Power According To The Necessary Procedure. Have The Ability To Polymerize Layers Of Resin In Just 1 Second, Making Work In Our Health Centers More Agile. The Led Must Be Located At The Tip Of The Device For Better Energy Delivery. It Should Not Have Optical Fiber In Order To Avoid Breakdowns And Costs For The Municipality. Must Come With Eye Protector, Application Tip, Tip Protection Covers And Thickness Scale For Resin Curing Time. The Battery Must Be Li-Ion With At Least 1300Mah, The Led Must Have At Least 5W Of Power, The Maximum Weight Must Be 300G. You Must Present A Company With Crea–Es That Will Be Responsible For The Installation And A Minimum Warranty Of 12 Months, Free Of Charge., Lot 2 - Gas Dental Stool: With Seat Height Adjustment Using A Chrome Piston. Backrest Height Adjustment Using A Self-Adjusting Ratchet Mechanism With At Least 10 Adjustment Points; Synchronized Seat/Backrest Adjustment Mechanism. Finishing On Metal Parts In Hard Chrome. Five Polyurethane Casters Of At Least 60 Mm In Diameter In Gray Color With Pu Band, Backrest Bagged With Injected And Coated Foam Covered In Antibacterial Synthetic Fabric. Seat Upholstered With Injected Foam And Covered With Antibacterial, Flame Retardant And Waterproof Synthetic Fabric, Backrest Tilt Via 35 Degree Leverable Mechanism. You Must Present A Company With Crea– Es That Will Be Responsible For The Installation And A Minimum Warranty Of 12 Months, Free Of Charge. The Color Will Be Defined Between The Oral Health Coordination And The Winning Company Of The Competition., Lot 3 - High Rotation: Composed Of A High Rotation Turbine With 400,000 Rpm Plus Or Minus 10%, Sterilizable In An Autoclave, Must Have A Stainless Steel Body, Push Button System, The Head Must Measure A Maximum (12.5X13.5Mm), Must Have At Least 3 Spray Outlets, Ceramic Bearings And A System That Prevents Residue From Entering The Head. It Must Have A Minimum Power Of 27W. It Must Support Autoclaving At A Temperature Of 135ºc. Must Have An Inmetro Certificate, Proving This Through Laser Engraving On The Piece Itself And A Certificate In The Name Of The Manufacturer. It Must Have A Rotor System With Cartridge And Encapsulated Bearing. Must Present A Company With Crea–Es That Will Be Responsible For Installation And Minimum Warranty Of 12 Months, Lot 4 - Contra Angle: With Reduced Head, With Stainless Steel Body And Sterilizable In Autoclave And Attachable To Intra Micromotor, Must Have Rotor System With Cartridge And Encapsulated Bearing, 1:1 Transmission, 360º Rotation In Micromotor And Rotation Of 40,000 Rpm More Or Hands 10%, Push Button System And External Irrigation. It Must Have Laser Engraving With The Name And Logo Of The Municipality. Must Have Clean Head System, Anti Backflow. It Must Withstand Autoclaving At A Temperature Of 135ºc. Must Have An Inmetro Certificate, Proving This Through Laser Engraving On The Piece Itself And A Certificate In The Name Of The Manufacturer. Must Present A Company With Crea–Es That Will Be Responsible For Installation And Minimum Warranty Of 12 Months, Lot 5 - Micromotor: With Rotation Of 25,000 Rpm Plus Or Minus 10%, Quick Tip Fitting System With 360º Rotation Of Coupled Parts And Borden Fitting. Body Must Be Made Of Stainless Steel. Must Have Laser Engraving With The Munic Name And Logo